Exhaust; Clutch And Starter Gear - Vortex MINI ROK Owner's Manual

VORTEX FACTORY: Via E. Fermi, 5 – 27040 Campospinoso (PV)– ITALY – Tel. +39 0385 765200
make necessary the spark plug to be checked
and cleaned, at least every 5 hours.
Setting Plug Gap:

5.8. Exhaust

Cleaning:
Oils produce carbon deposits or residues that
make necessary the spark plug to be checked
and cleaned, at least every 10 hours.

5.9. Clutch and Starter Gear

Cleaning and/or replacing clutch:
Via dei Soprini, 16 – 25080 PREVALLE (Brescia) ITALY-Tel. +39 030 6804601 – Fax +39 030 6804698
Use a specific spark plug gap gauge to set up
correct gap. Correct gap: 0,8 mm.
1.Remove the muffler from the engine by
removing the 2 springs in the cradle and the 2
springs in the exhaust manifold.
2.Unscrew the 3 bolts in the exhaust terminal.
3.Warm up the pipe with a heat source and
remove any carbon deposits by means of a
metal brush.
1.Disassemble the clutch cover.
2. Take away the Bendix cover
3.Stop the clutch drum by using the special tool
designed by Vortex for this specific task.
4.Unscrew anticlockwise the nut on the clutch
drum (92). Remove the washer (91), clutch
drum (87) and roller bearing (90).
5. Unscrew the three 6x14mm Allen screws (79)
on the clutch.
OTK KART GROUP srl