Vortex MINI ROK Owner's Manual page 18

VORTEX FACTORY: Via E. Fermi, 5 – 27040 Campospinoso (PV)– ITALY – Tel. +39 0385 765200
13
Flat Screwdriver
Take the intake silencer off the carburettor by
unscrewing the clamp. It is not necessary to
unscrew the bracket. The intake silencer will
turn easily.
14
8 mm Fixed Wrench
Adjust the throttle cable by setting the pedal
stop on the chassis in order to get the pedal to
stop at the point where the slide in the
carburettor is fully open.
15
5 mm Fixed Wrench
Attach now the battery cradle to the chassis
main rail next to the seat using the specific
plastic clamp provided.
A battery mounting spacer plate may be
required to clear the brake cable.
16
4 mm Allen Wrench + 10 mm Fixed
Wrench
Remove relay from socket in the wiring loom.
Secure the wiring loom to the battery cradle
using a 6x25 mm Allen screw, bi conical washer,
2 plastic spacer, washer and 4 mm nut.
Via dei Soprini, 16 – 25080 PREVALLE (Brescia) ITALY-Tel. +39 030 6804601 – Fax +39 030 6804698
OTK KART GROUP srl