Battery Installation - Kenwood CarPortal KOS-V1000 Instruction Manual

¤
• Put the Remote Controller in a place where it will not move during braking or other operations. A dangerous situation
could result, if the Remote Controller falls down and gets wedged under the pedals while driving.
• Do not place the battery near an open flame or heat source. This may cause the battery to explode.
• Do not recharge, short, break up or heat the battery or place it in an open fire. Such actions may cause the battery to leak
fluid. If spilled fluid comes in contact with your eyes or on clothing, immediately rinse with water and consult a physician.
• Place the battery out of reach of children. In the unlikely event that a child swallows the battery, immediately consult a
physician.

Battery installation

Use two "AAA"/"R03"-size batteries.
Slide the cover while pressing downwards to
remove it as illustrated.
Insert the batteries with the + and – poles
aligned properly, following the illustration
inside the case.
⁄
• If the Remote Controller operates only over shorter
distances or does not operate at all, it is possible that
the batteries are depleted. In such instances, replace
the both batteries with new ones.
Remote Controller mode switch
The functions operated from the remote
controller differ depending on the position of
the mode switch.
AUD mode
Switch to this mode when
controlling a selected source
N POSITION
or a CD changer etc.
DVD mode
AUD
Switch to this mode when
•
DVD
playing DVD player unit.
•
•
TV mode
T V
•
This is switched when
NAVI
controlling TV.
DIO RETURN
NAVI mode
CANCEL
This is switched when
controlling Navigation unit.
⁄
• The position of the remote control mode switch is
indicated in the title of each mode, e.g., "(AUD mode)".
• When controlling a player that is not integrated in the
unit, select "AUD" mode.
Next page 3
English 11