Setting Up The Hands-Free Phone; Selecting A Hands-Free Phone - Kenwood CarPortal KOS-V1000 Instruction Manual

Hands Free Unit Control

Setting up the Hands-Free Phone

The Hands-Free system can be set as follows.
Hands-Free Set Up screen
Hands Free SETUP
Auto Response
1
Phone Voice
2
Beep
Select
4
1 Sets an automatic response time after call
termination. (
"Off": This function can not use.
"0-99":Sets to calling ring time (second).
2 Sets a ringing tone output position.
( "Front-R")
"Front-L":
"Front-R":
"Front All": Outputs the tone from the
3 Sets the beep of the incoming call.
( "On")
"On": Beep is heard.
"Off": Beep is canceled.
4 Displays the Phone Select screen.
5 Displays the Phone Delete screen.
6 Returns to the Hands-Free Control screen.
⁄
• Either the time interval for automatic answer set on this
unit or the time interval set on the cell-phone, whichever
is shorter, takes effect.
• Select the speaker which is further from the microphone
in order to prevent howling or echoes.
54 KOS-V1000
AUTO
1
8
2
Front L
3
On Off
6
Remove
5
"8")
Outputs the tone from the
front left-hand side speaker.
Outputs the tone from the
front right-hand side speaker.
both front speakers.

Selecting a Hands-Free Phone

You can choose the Hands-Free phone from the
list.
1 Display the Hands-Free Set Up screen
2 Display the Phone Select list
Hands Free SETUP
Auto Response
Phone Voice
Beep
Select
Phone Select screen
1
1 Selects the cell-phone to be used as a
hands-free phone.
2 Returns to the Hands-Free Set Up screen.
3 Select a Hands-Free phone you wish to use
AUTO
8
Front L
On Off
Remove
2