Clock Adjustment; Displaying The Time - Kenwood C-V750 Instruction Manual

Clock adjustment

This unit incorporates a clock function. Be sure to adjust the
correct time before using the timer function.
48
The time display blinks after a power failure or
when the power cord has been unplugged from
the AC outlet and plugged in again. In such a
case, adjust the clock again.
1
Activate the clock adjustment mode.
Main unit
1 Press the CLOCK key.
CLOCK
2
Enter the hour.
Main unit
1
PTY SELECT
TUNING
To decrease To increase
the figure the figure
2 Press the CLOCK key.
CLOCK
3
Enter the minute.
Main unit
1
PTY SELECT
TUNING
To decrease To increase
the figure the figure
2 Press the CLOCK key.
CLOCK

Displaying the Time

The displayed information
can be switched every
time the Display icon is
selected.
GRC
Main Menu
ENTER
Main Menu
ENTER
Display
ENTER
: Keys or controls to be used in this operation
Example: Adjustment to 8:15
A M 1 2: ) )
÷ The time display starts to blink.
A M
÷ The time is represented in 12-hour AM/PM method.
÷ Press the CLOCK key. The hour is entered and the minute display
starts to blink.
A M
÷ If you make a mistake, restart from the beginning.
÷ To adjust correct time, press the CLOCK key at the same moment as
a time announcement.
Each press switches the indication.
1 Input selection display
2 DOLBY/DSP/STEREO display
3 Clock display (about 5 seconds)
8 9 ; ) ) P R O L O G I
MHz
C-V750 (En/T)
AV CONTROL CERTER KC-2
8: ) )
8: 1 5
C A M 8: 1 7