Table of Contents
Advertisement
Use the operating procedure on this page to store RDS
stations automatically in preset memory. Up to 40 RDS
28
stations can be preset and received with a simple key
operation.
This unit is compatible with the RDS so it can use convenient
RDS functions including automatic tuning and EON reserva-
tion.
RDS stations should be stored in the preset memory follow-
ing the procedure in "Storing RDS stations automatically in
preset memory" before listening to RDS stations.
Storing RDS stations automatically in preset memory
The following procedure allows to select stations broadcasting RDS broadcast and store them in the preset memory (up to 40
stations can be preset).
1
Set the INPUT SELECTOR to "TUNER".
Main unit
INPUT
2
Set the receiving band to "FM".
Main unit
O
BAND
3
Preset radio stations by AUTO MEMORY.
Main unit
In a few minutes, the stations with which
RDS broadcast is received are stored in
order beginning from preset channels
"01" (up to 40 stations can be preset).
Press the
A.MEMO key.
A.MEMO
AUTO
When the number of stations providing
RDS broadcasting is less than 40, some
of other FM stations will be preset in the
vacant channels.
Receiving a preset RDS station
Enter the preset number (max.
40) of the desired RDS station.
GRC
1 2 3
4 5 6
7 8 9
0 +10
: Keys or controls to be used in this operation
Main unit
Each press switches the indication.
1 VCR
2 AUX
3 TAPE 1 / MD
4 TUNER (frequency display)
5 CD
6 DVD-D
7 DVD-A / 6ch INPUT
8 LD -D
9 LD -A
0 CABLE / SAT
÷ The previously tuned frequency is displayed.
Each press switches the indication.
1 FM
2 MW
3 LW
A U T O M E M O
÷ If stations have already been stored in preset channels, the same
number of these preset channels as the number of stations are cleared
and replaced with the data of the newly preset stations.
Press numeric keys in the order as described below:
To enter "15" ........... 0
ENTER
To enter "20" ........... 0
ENTER
÷ If you commit a mistake in entering the digit of 10, press the 0 key
several times to return to the original display and re-enter the preset
number from the beginning.
÷ Press the RDS DISPLAY key to change the displayed information.
B B C 1 FM
RDS
FM
RDS (Radio Data System)
C-V750 (En/T)
AV CONTROL CERTER KC-2
(AUTO MEMORY)
Frequency display
8 9 ; ) )
MHz
- -
FM
The "FM" indicator should light.
Blinks
5
ENTER
0
)
ENTER
ENTER
Hide quick links:
Advertisement
Table of Contents
