Setup Of The Surround Effect Parameters (Dsp) - Kenwood C-V750 Instruction Manual

46
Setup of the surround effect parameters
1
Select the DSP surround mode.
Main unit
1 Select DSP.
O DSP
2
Select the adjustment parameter.
Main unit
1 Display the setup screen.
MUL
MODE
To quit the setup mode in the middle:
If no key has been pressed for about 5 seconds, the setup
display disappears and the display returns to the status
before the setup mode was entered.
(Main unit display)
3
Adjust the effect level. "EFFECT"
Main unit
1 Confirm the "EFFECT" Level adjustment
display.
2 Adjust the level as required.
MULTI.CONTROL
LEVEL
To decrease To increase
MU
MODE
3 Enter the setup.
Go to adjustment step"4".
GRC
ENTER
DSP Mode
ENTER
GRC
Set Up
ENTER
Sound
ENTER
DSP
ENTER
GRC
Select icon as required.
Effect
Level
2
To decrease To increase
ENTER
Select the step "4" icon.
Main operation menu
(DSP)
÷ This can be selected when the input signal is other than Dolby Digital
(AC-3).
Main unit
Each press switches
the indication.
1 ARENA
2 JAZZ CLUB
3 STADIUM
4 CATHEDRAL
5 THEATER
÷ The effects of adjustments are applied equally to sound fields 1 to 5.
÷ Switching is not possible when the 6ch INPUT is used.
Main unit
Each press switches the
adjustment parameters.
3 EFFECT
4 WALL
5 ROOM
6 BASS
7 TREBLE
8 L- - - - - - -R
9 Cch
0 SRch
! SLch
@ SWch
# INPUT
÷ Setup/adjustment operations 6 to # are to be performed only when
required.
E F F E C T
÷ The EFFECT level can be adjusted between 1 and 5.
Ambience effects
C-V750 (En/T)
Setup DSP Parameter
Wall Type
Soft Med Hard
Effect
Level
Room Size
Sml Med Lrg
(The displayed icons are variable depending
on the model.)
GRC
1 Selection cursor
Sound DSP Mode
Arena
2 Entry
ENTER
GRC
Select an adjustment parameter icon
by moving the cursor.
Setup DSP Parameter
Wall Type
Soft Med Hard
Effect
Level
Room Size
Sml Med Lrg
2
1
1