Assembling The Main Frame - Precor Discovery Series Plate Loaded Line Owner's Manual

Plate loaded line

Hide thumbs Also See for Discovery Series Plate Loaded Line:

Table of Contents

Enlarged version

Assembling the Main Frame

To connect the base frame to the vertical frame:

1. Position the vertical frame on the base frame as shown in the following

figure.

Figure 4: Main frame assembly

Calf Raise Assembly Guide: Assembling the Equipment

2. Secure the frames using four M12 x 35 mm socket head cap screws and

four 13 mm flat washers. Tighten the fasteners completely.

Table of Contents

Table of Contents

Do you have a question about the Discovery Series Plate Loaded Line and is the answer not in the manual?

Discovery series