Table of Contents
Advertisement
Q
UICK
This transceiver is equipped with the E2O (Easy-To-Operate) system. You can
do the basic operation in numerical order of the illustration below.
[ PTT ] S
Speak into the micro-
phone in a normal
voice level while
pressing this switch.
[ 16/9 ] B
P r e s s t o r e c a l l
channel 16.
Press and hold to
recall channel 9.
[
(
)] B
Press to toggle the
transmit power be-
tween High (5W) and
Low (1W).
For additional details, refer to next page or section "5. CONTROLS AND
INDICATORS".
HX400IS
R
EFERENCE
[ ] / [ ] B
Selects the operating
channel.
NOTE
G
UIDE
[ PWR/VOL ] K
Rotate this knob
clockwise to turn on
the radio, and adjust
the audio level.
MIC
When transmitting,
position your mouth
1 inch (2.5 cm) away
from the small mic
hole.
Speak slowly and
clearly into the micro-
phone.
[ SQL ] B
Press this key first,
then press the [
key to squelch or
press the [ ] key to
un-squelch the radio.
]
Page 3
Advertisement
Table of Contents
