Page 2
Performance Performance Features Features EverClear EverClear No Fog FaceShield No Fog FaceShield ® ® Optically-clear shield with state-of-the art fog free Optically-clear shield with state-of-the art fog free technology. Anti-Scratch hardened coating. technology. Anti-Scratch hardened coating. KwikWick II KwikWick II Liner Fabric Liner Fabric ®...
Introduction FaceShields Ellip-Tec Function Ventilation Systems Ventilation helps decrease the possibility of fogging and condensation.
Page 4
Face Shield Lock/Vent Lever Face Shield Lock/Vent Lever Note: First, Close Shield to the Note: First, Close Shield to the lowest position to Lock/Unlock. lowest position to Lock/Unlock. To lock the faceshield, turn Locking-lever counter To lock the faceshield, turn Locking-lever counter clockwise to the 2 o’clock position approximately.
Page 5
Cheek Pads Removal Occassionally the cheek pads may require removal for washing or replacement. First step: Remove the Aero Skirt. (refer to page 6). Second step: Slide your thumb between the cheek pad and chin bar, gently tug. Once both cheek pads are removed you can also remove the crown liner component.
Page 6
Crown Liner Removal Crown Liner Removal Occassionally the crown liner may require Occassionally the crown liner may require removal for washing, replacement or to removal for washing, replacement or to change sizes. change sizes. First step is to remove the Cheek Pads. First step is to remove the Cheek Pads.
Page 7
Aero Skirt Removal The pliable Aero Skirt was designed to reduce wind from entering behind the face shield area, specifically to keep your face warmer in cold weather. You do however have the option to remove the Aero Skirt for cleaning or for warmer riding conditions.
Page 8
Emergency Release System SNAP Slot SNAP PULL PUSH Cheek Pad SNAP Emergency Safety Release System SNAP Hole PRECAUTION Locate the emergency labeling on the 1. SNAP may come off from the Cheek Pad neck roll. Simply reach under the during Cheek Pad removal. neck roll and grab the release strap, 2.
Page 9
Securing and Wearing your Helmet FaceShield Replacement Do not simply pull your helmet down onto your head like a hat. Your Scorpion- Exo™ helmet should be worn as follows: Using both hands grab the helmet’s bottom rim while holding the chin straps with your thumbs. Then “roll” the helmet onto your head starting at the forehead.
Continued from pg. 9 >> DO NOT ride with a scratched faceshield. This can impair your vision, especially at night. DO NOT modify any part of your helmet, e.g., drilling the shell or cutting and pressing the shock absorbing liner. Installation of sound systems, speakers and microphones reduces your helmet’s ability to protect you and is not recommended.
Page 11
Subscribe to our YouTube page for fresh videos on our latest products: http://www.youtube.com/user/ScorpionNation Download our FREE iPhone/iPad App. available on the App Store: http://itunes.apple.com/us/app/scorpionexo/id429393136?mt=8 Follow us on Instagram for a visual look into the Scorpion nest: Search user @Scorpionexo or #scorpionexo...
Page 12
Kido Sports USA, LLC. ScorpionEXO Warranty/Tech Center 10425 Slusher Drive Santa Fe Springs, CA 90670.USA T: 1.888.212.0688 E: warranty@kidosportsusa.com...
Need help?
Do you have a question about the Exo-R410 and is the answer not in the manual?
Questions and answers