Advertisement
Quick Links
Box: PLOCK 1
BIKE
HONDA CBR 1000 RR
YEAR
2008 - ON
NOTES
Bung and copper washer to be replaced by OE lambda
probe. (not applicable to non catalyst models)
1
275mm Coned Silencer ESC 124
2
2 x 51-55mm Band Clamps (Z016.10002)
3
Connecting Box CP461
4
M8 x 16mm Cap Head (Z017.10808)
5
M8 x 17mm Washer (Z017.10831)
6
2 x M6 Star Washers (Z017.10614)
7
4 x Nylon Washers (Z017.12748)
NOTE:
ENSURE SCORPION SYSTEM IS CLEAR OF MOVING PARTS AND ALL ORIGINAL FUNCTIONS WORK CORRECTLY.
PART NO.
FIT KITS
FEATURES
1
2
6
8
7
6
8
8
2 x M6 x 10mm Button Heads (Z017.12707)
9
Carbon Fibre Fairing (Z028.10214)
10 Heat Shield Left & Right (Z028.10220) (Z028.10219)
FITTING INSTRUCTIONS 1/3
EHA - 95
EHA - 95
DB KILLER Z038.10127
3
5
7
9
7
E-MARK BOX
E-MARK OVAL
ISSUE NO.
DATE
AUTHORISED
CHECKED
A) Remove original exhaust from
bike, taking care to keep all original
components in a safe place.
B) Refit Scorpion exhaust as per
line diagram above.
C) When fitted take bike for a short
ride to ensure all functions are
correct.
D) When bike & exhaust are cool
enough check all nuts and bolts
are still secure.
4
2
HA-95e4 2295 5 9
HA-95 e4 2295 9
7
26/01/10
S.Northrop
scorpion-exhausts.com
Advertisement
Related Manuals for SCORPION EHA-95
Summary of Contents for SCORPION EHA-95
- Page 1 S.Northrop 4 x Nylon Washers (Z017.12748) CHECKED NOTE: ENSURE SCORPION SYSTEM IS CLEAR OF MOVING PARTS AND ALL ORIGINAL FUNCTIONS WORK CORRECTLY. A) Remove original exhaust from bike, taking care to keep all original components in a safe place. B) Refit Scorpion exhaust as per line diagram above.
- Page 2 E) Undo the clamp holding the O.E exhaust silencer. F) Remove the bolt holding O.E silencer to footrest. G) The O.E silencer now can be removed from the bike. H) Take the supplied heat mat and fit inside of the fairing. scorpion-exhausts.com...
- Page 3 With the underbelly box, lambda sensor on and all tightend up you can now fasten the fairing back into place. L) Fit the Scorpion silencer onto the outlet of the underbelly box . M) Bolt through bracket onto footrest. When silencers are aligned tighten both the clamp and bracket.