SCORPION RTR-75 Fitting Instructions

Box:PLOCK 1
BIKE
Triumph Daytona 675 / Daytona 675 R
YEAR
2013-16
NOTES Use standard fittings where not supplied
Remove standard gasket if fitted.
1 Serket Silencer RSC274
2 47-51mm Band Clamp (Z016.10003)
3 Connecting Pipe CP718
4 2 x Rubber Coated Springs (Z028.10030)
5 Bracket (Z015.31031)
6 2 x M8x17mm Washers (Z017.10831)
7 2 x M8 Nyloc Nuts (Z017.10062)
8 M8x25mm Cap Head Bolt (Z017.10073)
NOTE: ENSURE SCORPION SYSTEM IS CLEAR OF MOVING PARTS AND ALL ORIGINAL FUNCTIONS WORK CORRECTLY.
PART NO.
FIT KITS
DB-Killer
9 Alloy Bolt Finisher (Z026.20068)
FITTING INSTRUCTIONS 1/3
RTR-75
Z039.20486
SCEXDBK23 - (Type V)
E-MARK
ISSUE NO.
DATE
AUTHORISED
CHECKED
A) Remove original exhaust from
bike including servo motor and
cable (see next page) taking care
to keep all original components in
a safe place.
B) Refit Scorpion exhaust as per
line diagram above.
C) When fitted take bike for a short
ride to ensure all functions are
correct.
D) When bike & exhaust are cool
enough check all nuts and bolts
are still secure.
TR-63 e4 2361 9
01
22/10/2018
J.Harkin
scorpion-exhausts.com