Page 2
Ellip-Tec® Base Plate Ellip-Tec® Base Plate Scorpion’s ratchet system uses an elliptical motion that creates 7.6mm of travel which Scorpion’s ratchet system uses an elliptical motion that creates 7.6mm of travel which pulls the shield securely against the eye port, ensuring a proper seal. The Ellip-Tec pulls the shield securely against the eye port, ensuring a proper seal.
FaceShields FaceShields Introduction Introduction Congratulations for acquiring a premium ScorpionExo Congratulations for acquiring a premium ScorpionExo ® ® helmet. helmet. The faceshield on your ScorpionExo The faceshield on your ScorpionExo ® ® helmet provides helmet provides This helmet embodies the latest, state-of-the-art design, This helmet embodies the latest, state-of-the-art design, protection from weather, small flying objects and wind.
Page 4
FRONT VIEW OF THE HELMET FRONT VIEW OF THE HELMET Crown Liner Crown Liner Top Intake Vents Top Intake Vents Ellip-Tec Ellip-Tec ® ® Base Plate Base Plate Speedview Speedview ® ® Internal Sunvisor Internal Sunvisor Neck Roll and Cheek Pad Neck Roll and Cheek Pad (Side View) (Side View)
Page 5
USING THE RETRACTABLE USING THE RETRACTABLE SPEEDVIEW® SUNVISOR SPEEDVIEW® SUNVISOR NOTE: THE RETRACTABLE INTERNAL SUNVISOR CAN NOTE: THE RETRACTABLE INTERNAL SUNVISOR CAN BE LOWERED AND RETRACTED, REGARDLESS OF BE LOWERED AND RETRACTED, REGARDLESS OF WHETHER OR NOT THE FACESHIELD IS UP OR DOWN. WHETHER OR NOT THE FACESHIELD IS UP OR DOWN.
Page 6
Though the inflation / deflation system of this helmet is designed to be used when you are actively wearing designed to be used when you are actively wearing your EXO-GT3000. your EXO-GT3000. DO NOT ATTEMPT TO RELEASE WHILE RIDING DO NOT ATTEMPT TO RELEASE WHILE RIDING...
Page 7
REMOVAL OF SPEEDVIEW® SUNVISOR REMOVAL OF SPEEDVIEW® SUNVISOR FOR CLEANING OR REPLACEMENT FOR CLEANING OR REPLACEMENT NOTE: FIRST, OPEN OUTER SHIELD TO THE HIGHEST POSITION. THEN LOWER THE NOTE: FIRST, OPEN OUTER SHIELD TO THE HIGHEST POSITION. THEN LOWER THE SUNVISOR TO LOWEEST POSSIBLE POSITION.
Page 8
OPERATION OF FLIP UP CHIN BAR PULL LEVER DOWN AND AWAY FROM FACE !WARNING! BE SURE THAT CHIN BAR IS CLOSED SECURELY! DO NOT OPERATE MOTORCYCLE WITH CHIN BAR IN OPEN POSITION! DO NOT ATTEMPT TO ADJUST WHILE RIDING...
Page 9
SECURING AND WEARING FACESHIELD REPLACEMENT YOUR HELMET Do not simply pull your helmet down onto your head like a hat. Your ScorpionExo helmet should be worn as follows: Using both hands grab ® the helmet’s bottom rim while holding the chin straps with your thumbs. Then “roll”...
Page 10
Continued from pg. 9 >> DO NOT ride with a scratched faceshield. This can impair your vision, especially at night. DO NOT modify any part of your helmet, e.g., drilling the shell or cutting and pressing the shock absorbing liner. Installation of sound systems, speakers and microphones reduces your helmet’s ability to protect you and is not recommended.
Need help?
Do you have a question about the Exo-GT3000 and is the answer not in the manual?
Questions and answers