Esc+L Enlargement - SATO CL4NX Programming Reference Manual

7.2 Modification
7.2

ESC+L Enlargement

Enlargement
ESC
Hexadecimal
code <1B>
16
Initial value aa=01,bb=01
When the power switch is OFF
Valid range and
Valid range within items
term of
Valid range between items
command
[Function]
Specifying the enlargement ratio of font.
[Format]
<L>aabb
●Parameter
aa[Horizontal enlargement ratio]
bb[Vertical enlargement ratio]
[Coding Example] Horizontal enlargement ratio: 4 times,
<A>
<V>100<H>200<P>3<L>0403<XM>ABCD
<Q>2
<Z>
[Supplementary Explanation]
Enlarges the character pitch as well. When Character Pitch <P> is used at the same time, the parameter value of
horizontal enlargement ratio specified in Enlargement <L> will be reflected in the subsequent specification <P>.
[Note]
If increasing the enlargement ratio, design the print format that does not exceed print area.
[Valid Command]
<XU>
<K3>
Font
<k3>
<M>
<P>
Modification
Graphic <G>
Memory card <GR>
L Parameter
<4C> aabb
16
The set parameter is not maintained.
The set parameter is valid until the next valid setting.
The set parameter becomes initial value at the next item
<A>.
= Valid range: 01 to 36
= Valid range: 01 to 36
<XS> <XM> <XB>
<K5> <K8>
<K4>
<k5> <k8>
<k4>
<WB> <WL> <X20>
<RF>
<GM> <GP>
<GC> <PY>
19
ESC+L
Vertical enlargement ratio: 3 times
<XL> <OA> <OB>
<K9> <KA> <KB>
<k9> <kA> <kB>
<X21> <X22> <X23>
<K1> <K2>
<k1> <k2>
<KD>
<U> <S>
<kD>
<X24>