System Requirements - Sharp LL-S242A-W Operation Manual

nTouch panel
To use the touch panel, the monitor must be connected to a computer using a USB cable.
Touch panel operating conditions are as described below.
Computer
OS
• Windows 7 or later is recommended for touch action.
• The digitizer pen can be used with Windows 7 or later.
• On Windows 7 or later, the touch panel operates with the standard Windows driver. On Windows Vista, the touch panel driver
must be installed on the computer from the supplied CD-ROM. (See page 19)
8
E

System Requirements

PC/AT compatible computer with a USB 1.1 port and able to output a resolution of 1920 x 1080.
Windows 8.1 (32-bit or 64-bit version), Windows 8 (32-bit or 64-bit version),
Windows 7 (32-bit or 64-bit version), Windows Vista (32-bit or 64-bit version)