Sharp LL-S242A-W Operation Manual page 16

Installation
Portrait orientation
Run the cables along the hollow on the front side and out
between the legs of the back side.
7. Secure the monitor to the stand using the two fixing
screws.
Landscape orientation
Portrait orientation
16
E
Fixing screws (supplied)
Fixing screws (supplied)
Disassembling the rack stand
Remove the monitor from the rack stand before disassembling
the stand.
Caution
• After removing the monitor from the rack stand, store the
stand so that the screws will not be lost.
1. Remove the screws and remove the monitor.
2. Disengage the tabs of the support on the front side,
and raise the support.
3. Fold the stand closed and separate the front and back
sides.
Remove fixing screws