Sharp LL-S242A-W Operation Manual page 15

nLL-S242A-W
Placement on the rack stand
Place the unit on the supplied rack stand.
1. Attach the back of the stand to the front.
Place the front and back sides together, and attach the
hinge.
Front
Front
2. Spread the base of the front and back sides.
Front hinge part
Back
Back hinge part
Tape
Back
Support
3. Peel off the adhesive tape securing the support to the
back side.
4. Fold down the support, inserting the tabs into the
holes on the front side.
5. Position the stand.
6. Place the monitor in the stand.
Landscape orientation
Run the cables out between the legs of the back side.
Installation
Tape
Back
Support
15
E