Installing The Chassis Into A Rack - Supero SUPERSERVER 5018A-MLTN4 User Manual

S S
UPER ERVER 5018A-MLTN4 User's Manual
Figure 2-5. Installing the Chassis into a Rack

Installing the Chassis into a Rack

Installing the Chassis
1. Confirm that the inner rails are attached to the chassis. Also, confirm that the
outer rails are installed on the rack.
2. Align chassis rails with the front of the rack rails.
3. Slide the chassis rails into the rack rails, keeping the pressure even on both
sides (It may be necessary to depress the locking tabs when inserting). When
the server has been pushed completely into the rack, you should hear the
locking tabs "click" into the locked position.
4. (Optional) Insert and tightening the thumbscrews that hold the front of the
server to the rack.
Note: this figure is for illustrative purposes only. Always install servers to the bot-
tom of a rack first.
2-8