Installing The System Into A Rack; Installing The Chassis Into A Standard Rack - Supero SUPERSERVER 5018A-TN4 User Manual

S S
UPER ERVER 5018A-TN4 User's Manual
2-5

Installing the System into a Rack

This section provides information on installing the SC504 chassis into a rack unit.
There are a variety of rack units on the market, which may mean the assembly
procedure will differ slightly. You should also refer to the installation instructions that
came with the rack unit you are using.

Installing the Chassis into a Standard Rack

1. Confirm that chassis includes the four mounting screws required to mount the
chassis into a rack
2. Align the thru holes of the chassis with the thru holes of the rack.
3. Insert the mounting screws into the thru holes in the front of the chassis and
through the thru holes in the rack and secure.
Figure 2-1. Installing the Chassis into a Rack
2-4