Bulbs - Extra High Beam; Bulbs - Front Turn Signals; Extra High Beam (Models With Active Bending Lights*) - Volvo XC60 Owner's Manual

10 Maintenance and servicing
Bulbs – extra high beam
The extra high beam bulb is concealed by the
larger cover.
2
Extra high beam
10
1. Remove the headlight housing from the
vehicle (see Bulbs – headlight housing
(p. 331)).
2. Remove the cover over the bulbs (see
Bulbs – cover (p. 332)).
3. Disconnect the wiring connector from the
bulb holder.
4. Remove the bulb holder from the head-
light housing by pulling it straight out.
5. Insert a new bulb in the holder. It can only
be inserted in one way.
Models with optional Active Bending Lights only.
2
334
6. Press the bulb holder into position in the
headlight housing.
7. Reconnect the wiring connector to the
bulb holder.
8. Put the cover back into position and rein-
stall the headlight housing.
Related information
•
Bulbs – specifications (p. 337)
Bulbs – front turn signals
The turn signal bulb is concealed behind the
smaller cover.
1. Remove the headlight housing from the
vehicle (see Bulbs – headlight housing
(p. 331)).
2. Remove the bulb holder by turning it
counterclockwise and pulling it out of the
headlight housing.
3. Pull out the holder to access the bulb.
4. Remove the burned out bulb by pressing
it in slightly and turning it counterclock-
wise.
5. Press the new bulb into the holder and
turn it clockwise.