Bulbs - Cover - Volvo XC60 Owner's Manual

10 Maintenance and servicing
||
2. Reinsert the headlight housing and lock-
ing pins. Check that they are correctly
inserted.
The headlight housing must be properly
10
in place and the wiring connector cor-
rectly reconnected before the lighting is
switched on or the remote key is inserted
into the ignition slot.
3. Check that the lights function properly.
Related information
•
Bulbs – introduction (p. 330)
•
Bulbs – cover (p. 332)
•
Bulbs – specifications (p. 337)
332
Bulbs – cover
The larger cover has to be removed in order
to change the high/low beam headlight bulbs.
Removing the cover to access the bulbs
NOTE
Before starting to replace a bulb, see
Bulbs – introduction (p. 330).
1. Loosen the cover's four retaining screws
(3-4 turns) with a Torx T20 tool (1). The
screws should not be removed com-
pletely.
2. Push the cover to the side.
3. Remove the cover.
Reinstall the cover in the reverse order.
Related information
•
Bulbs – headlight housing (p. 331)
•
Bulbs – low beam, Halogen (p. 333)
•
Bulbs – high beam, Halogen (p. 333)
•
Bulbs – extra high beam (p. 334)