Replacing High Beam Headlight Bulbs; Replacing Front Turn Signal Bulbs - Volvo XC90 Owner's Manual

MAINTENANCE AND SERVICING
Replacing High Beam headlight
bulbs
On models with halogen headlights, the High
Beam headlight bulb can be replaced by the
owner.
Before the bulb can be accessed, the headlight
housing's rectangular cover must be removed,
see the article "Removing the rectangular head-
light cover."
CAUTION
Never touch the glass of bulbs with your fin-
gers. Grease and oils from your fingers vapor-
ize in the heat and will leave a deposit on the
reflector, which will damage it.
528
Driver's side bulb housing shown
1. Remove the bulb by turning the bulb holder
upward and then pulling it straight out.
2. Carefully pry the plastic sleeve by the con-
nector's locking lug to release it.
3. Remove the connector from the bulb.
4. Insert a new bulb.
5. Insert the bulb in the socket and turn it
downward.
Related information
•
Removing the rectangular headlight cover
(p. 526)
•
Bulb specifications (p. 530)
•
Replacing bulbs (p. 524)

Replacing front turn signal bulbs

On models with halogen headlights, the front
turn signal bulb can be replaced by the owner.
Before the bulb can be accessed, the headlight
housing's rectangular cover must be removed,
see the article "Removing the rectangular head-
light cover."
Driver's side headlight housing shown
1. Press the retaining catches together and pull
the bulb holder straight out.
2. The bulb holder and bulb must be replaced
as one unit.
3. Press the new bulb holder into the socket.