Volvo XC60 Owner's Manual page 291

2
Location of jack*, towing eyelet and tools*
Changing a wheel
1. Apply the parking brake and put the gear
selector in P.
2. Take out the jack*, lug wrench*, the tow-
ing eyelet and the wheel cover removal
tool* stowed under the floor of the cargo
area.
3. Remove the wheel cover (where applica-
ble) using the removal tool or remove the
wheel cover by hand.
4. Block the wheels that are on the ground
with wooden blocks or large stones.
The towing eyelet may be partially concealed under the rear edge of the cargo area. See the illustration Towing eyelet (p. 282) for its location.
2
Lug wrench and towing eyelet
5. Screw the towing eyelet into the lug
wrench as shown in the illustration.
CAUTION
The towing eyelet must be screwed into
the lug wrench as far as possible.
09 Wheels and tires
6. With the vehicle still on the ground, use
the lug wrench/towing eyelet to loosen
the wheel nuts ½ – 1 turn by exerting
downward (counterclockwise) pressure.
Jack attachment points
*
Option/accessory, for more information, see Introduction.
09
}}
289