Operation Of Remote Control Unit; Channel Space Setting - Kenwood HM-381MD Instruction Manual

Operation of remote control unit

Loading batteries
1 Remove the cover.
Operation
After plugging the power cord of this unit, press
the POWER ( ) key of the remote control unit to
turn the system ON. When the system is turned
ON, press the key of the function to be operated.
÷ When pressing more than one remote control keys
successively, press the keys securely by leaving an
interval of 1 second or more between keys.
1.The provided batteries are intended for use in operation checking, and their service life may be short.
2.When the remote controllable distance becomes short, replace both of the batteries with new ones.
Notes Notes
3.If direct sunlight or the light of a high- frequency fluorescent lamp (inverter type, etc.) is incident to the remote
sensor, malfunction may occur. In such a case, change the installation position to avoid malfunction.
Channel space switching
the United Kingdom and Australia)
(Except for
The space between radio channels has been set to the one that
prevails in the area to which the system is shipped. However, if the
current channel space setting does not match the setting in the area
where the system is to be used, for instance when you move from
area 1 or area 2 shown in the following table or vice versa, proper
reception of AM/FM broadcasts cannot be expected. In this case,
change the channel space setting in accordance with your area by
referring to the following table.
Area
USA, Canada and South
1
American countries
Other countries
2
2 Insert batteries.
÷ Insert two R6 ("AA"-size) batteries following the
polarity indications.
CHANNEL
Space Frequency
FM: 100 kHz
AM: 10 kHz
FM: 50 kHz
AM: 9 kHz
3 Close the cover.
Operating range
(approx.)
2 2
6m
1 Turn power on.
2 Press the TUNER/band key
3 Select the mode by using the "repeat" key.
Each press switches the space frequency alternately.
1 "FM
50 kHz" (FM 50 kHz, AM 9 kHz)
2 "FM 100 kHz" (FM 100 kHz, AM 10 kHz)
RANDOM PGM REPEAT
TRACK NO.
FM 0 2 1 1 9 0
AM
PM
C H N S P A C E
Blinks.
4 Establish the selection by pressing the "set/
demo" key.
HM-381MD (En)
Remote sensor
30˚ 30˚
ALL SLEEP A.P.S. O.T.T. PROG.
TOTAL AUTO TUNED STEREO
5 0
kHz
BEST HITS
MHz
• •
17