Activating Or Deactivating The O.t.t. Or Program Timer Execution; Sleep Timer - Kenwood HM-381MD Instruction Manual

Activating or deactivating the O.T.T. or program timer execution

1
Select the timer program No. to be used. (Remote control unit only)
2
Put the unit in standby mode.
To set the same timer program again
Press so that the desired PROG. indicators lights.
Press while power is ON.
TIMER
RANDOM PGM REPEAT ALL SLEEP A.P.S.
TRACK NO. TOTAL AUTO TUNED
÷ Be sure to load a disc or tape and adjust the listening
volume.
To check or modify the reservation contents, restart the timer reservation from the beginning.
Note Note
Sleep timer (SLEEP)
Set the number of minutes after which the unit is to be turned OFF.
Set the time.
To cancel
Turn the unit OFF or press the SLEEP key until
the sleep time is cancelled.
TIMER
POWER
Lights
1 2
O.T.T. PROG. R·
STEREO
SLEEP
Adjust the clock before setting the timer.
Each press of the key switches the program
numbers as follows.
1O.T.T. ......... Executes O.T.T. only.
2PROG.1 ...... Execution of program 1 only.
3PROG.2 ...... Execution of program 2 only.
4PROG.1, 2 .. Execution of programs 1 and 2.
5Off .............. Timer off.
÷ The selected program No. lights.
÷ The timer will not function unless a program No. is
selected.
÷ The standby/timer indicator lights in orange in standby
mode.
When timer operation is not required
Press so that all PROG. indicators are OFF.
Press while power is ON.
TIMER
RANDOM PGM REPEAT ALL SLEEP A.P.S.
TRACK NO TOTAL AUTO TUNED
÷ The reservation contents are held in memory.
÷ The unit is turned OFF automatically after the set time
has elapsed.
÷ Each press increases the timer period by 10 minutes. The
sleep timer can be set up to 90 minutes.
10=20=30...70=80=90=Cancel=10=20...
Lights
RANDOM PGM REPEAT ALL SLEEP A.P.S. O.T.T. PROG.
TRACK NO. TOTAL AUTO TUNED
FM 8 0 1 8 0 0 1 2
AM
PM
S L E E P • • 1 0
Duration for sleep timer
Timer operation
HM-381MD (En)
Goes off
O.T.T. PROG. 1 2 R·D·S E
T
STEREO
1 2
STEREO
kHz
BEST HITS O.
MHz
• •
67