Changing The Standard Menu - Viessmann Vitodens 200-W B2HA series Operating Instructions Manual

Vitodens 200 Series 19 to 150 Operating

Changing the Standard Menu

Setting the Temperature Unit °F (°C)
Restoring Factory Settings
You want to have details about heating circuit 2 (HC2)
or heating circuit 3 (HC3) displayed in the header of the
standard menu (see page 10).
Extended menu:
1.
2. "Settings"
3. "Standard menu"
4. Select the heating circuit
Factory setting: °C
Extended menu:
1.
2. "Settings"
3. "Temperature unit"
4. Select the temperature unit "°C" or "°F".
You can reset the factory settings of all modified values
for each heating circuit separately.
Extended menu:
1.
2. "Settings"
3. "Standard setting"
4. "Heating circuit 1", "Heating circuit 2" or
"Heating circuit 3"
The following settings and values are reset:
H Set room temperature for standard heating mode
("Set room temperature").
H Set room temperature for reduced heating mode
("Set red. room temp").
H Heating program ("Heating program").
H Set DHW temperature ("Set DHW temperature").
H Time program for central heating
("Heating time program").
H Time program for DHW heating ("DHW time prog").
H Time program for DHW circulation pump
("DHW circ time prog").
H Heating curve slope ("Slope") and level ("Level").
Party mode, economy mode and holiday program are
deleted.
Additional Adjustments
27