Setting The Display Contrast - Viessmann Vitodens 200-W B2HA series Operating Instructions Manual

Vitodens 200 Series 19 to 150 Operating

Setting the Display Contrast

Setting the Display Brightness
Entering Names for the Heating Circuits
Extended menu:
1.
2. "Settings"
3. "Contrast"
4. Set the required contrast.
If you would like the texts in the menu to be more clearly
legible, change the brightness for "Control".
You can also alter the screen saver brightness.
Extended menu:
1.
2. "Settings"
3. "Brightness"
4. "Control" or "Screen saver"
5. Set the required brightness.
You can give heating circuits 1, 2 and 3 ("HC1", "HC2"
and "HC3") individual names. The abbreviations "HC1",
"HC2" and "HC3" will be retained.
Extended menu:
1.
2. "Settings"
3. "Name for heating circ."
4. "Heating circuit 1", "Heating circuit 2" or "Heating
circuit 3"
5. "Change?"
6. You can select the required symbol with
7. takes you to the next character.
OK
8. Press to accept all entered characters at once
and simultaneously exit this menu.
Additional Adjustments
.
25