Multi-Effects Parameter - Roland XV-2020 Owner's Manual

Using the XV-2020 Effects

Multi-Effects Parameter

PATCH/RHYTHM MFX, PERFORM MFX (Multi-Effects Settings)
Parameter
TYPE
(Multi-Effects Type)
SEND LEVEL DRY
(Multi-Effects Dry Send Level)
SEND LEVEL CHO
(Multi-Effects Chorus Send Level)
SEND LEVEL REV
(Multi-Effects Reverb Send Level)
CONTROL SOURCE 1–4
(Multi-Effects Control Source)
DESTINATION 1–4
(Multi-Effects Control Destination
1–4)
SENS 1–4
(Multi-Effects Control Sensitivity
1–4)
SOURCE MFX
(Multi-Effects Source)
PATCH/PERFORMANCE CHORUS (Chorus Settings)
Parameter
TYPE
(Chorus Type)
LEVEL
(Chorus Level)
OUTPUT SELECT
(Chorus Output Select)
CHORUS
(Chorus Source)
PATCH/PERFORMANCE REVERB (Reverb Settings)
Parameter
TYPE
(Reverb Type)
LEVEL
(Reverb Level)
REVERB
(Reverb Source)
80
Value
00 (THROUGH) –40
0–127
0–127
0–127
OFF, CC01–31,
CC33–95, BEND,
AFTER, SYS1–4
Refer to "Multi-Effects
Parameters (p. 82)."
-63–+63
PERFORM, PART 1–16
Value Description
OFF, CHORUS This determines whether or not chorus is used.
0–127 Adjusts the volume of the sound that has passed through chorus.
MAIN, REV, Specifies how the sound routed through Chorus will be output.
MAIN+REV
MAIN: Output to the OUTPUT jacks in stereo.
REV: Output to Reverb in mono.
MAIN+REV: Output to the OUTPUT jacks in stereo, and to Reverb in mono.
* Used in Performance mode.
PERFORM, Selects the Chorus parameter settings that will be used by the Performance. If you wish to use
PART 1–16 the Performance settings, select PERFORM. If you wish to use the settings of the Patch/
Rhythm Set assigned to one of the Parts, select the Part number.
* Used in Performance mode.
Value Description
OFF, REVERB This determines whether or not reverb is used.
0–127 Adjusts the volume of the sound that has passed through Reverb.
PERFORM, Selects the Reverb parameter settings that will be used by the Performance. If you wish to use
PART 1–16 the Performance settings, select PERFORM. If you wish to use the settings of the Patch/
Rhythm Set assigned to one of the Parts, select the Part number.
* Used in Performance mode.
Description
Use this parameter to select from among the 40 available Multi-effects.
* For details on Multi-effects parameters, refer to "Multi-Effects Parameters
(p. 82)."
Adjusts the volume of the sound that has passed through the Multi-effects.
Adjusts the amount of Chorus for the sound that passes through Multi-ef-
fects. If you don't want to add the Chorus effect, set it to 0.
Adjusts the amount of Reverb for the sound that passes through Multi-ef-
fects. If you don't want to add the Reverb effect, set it to 0.
Selects the Control Source to be used for changing the Multi-effects param-
eters.
Selects the Multi-effects parameter to be controlled using Ctrl Src 1–4. The
parameters that can be selected depend on which type of Multi-effects is
set to MFX Type.
If you wish to modify the selected parameter in a positive (+) direction—
i.e., a higher value, toward the right, or faster, etc.—from its current set-
ting, select a positive (+) value. If you wish to modify the selected param-
eter in a negative (-) direction—i.e., a lower value, toward the left, or
slower, etc.—from its current setting, select a negative (-) value. Higher
numbers produce a greater amount of change.
Selects the Multi-effects parameter settings that will be used by the Perfor-
mance. If you wish to use the Performance settings, select PERFORM. If
you wish to use the settings of the Patch/Rhythm Set assigned to one of
the Parts, select the Part number. (When using the XV Editor, you can
make this setting in the PERFORM PART ALL screen. p. 71)