Roland XV-2020 Owner's Manual page 90

Using the XV-2020 Effects
33: ENHANCER -> FLANGER
fig.02-033m
L in
Enhancer
Mix
R in
Enhancer
Mix
Parameter Value
Enhancer Sens # 0-127
Enhancer Mix 0-127
Flg Rate 0.05-10.00 Hz
Flg Depth 0-127
Flg Feedback -98-+98 %
Flg Delay 0.0-100.0 ms
Flg Balance # D100:0W-
D0:100W
Level 0-127
34: ENHANCER -> DELAY
fig.02-034m
L in
Enhancer
Mix
R in Enhancer
Mix
Parameter Value
Enhancer Sens # 0-127
Enhancer Mix 0-127
Delay Time 0.0-500.0 ms
Dly Feedback -98-+98 %
Dly HF Damp 200-8000 Hz,
BYPASS
Dly Balance # D100:0W-
D0:100W
Level 0-127
90
Balance D
L out
Feedback
Balance W
Flanger
Balance W
R out
Balance D
Description
Sensitivity of the enhancer
Level of the overtones generated
by the enhancer
Frequency of modulation
Depth of modulation
Adjusts the amount of the
flanger sound that's fed back
into the effect. Negative (-) set-
tings invert the phase.
Adjusts the time until the flanger
is heard.
Adjusts the volume balance be-
tween the sound sent through
the flanger (W) and the sound
that's not sent through the
flanger (D).
Output level
L out
Balance D
Balance W
Delay
Balance W
Feedback
R out
Balance D
Description
Sensitivity of the enhancer
Level of the overtones generat-
ed by the enhancer
Adjusts the time until the delay
is heard.
Adjusts the amount of the de-
lay sound that's fed back into
the effect. Negative (-) settings
will invert the phase.
Adjusts the frequency above
which sound fed back to the ef-
fect is filtered out. If you don't
want to filter out any high fre-
quencies, set this parameter to
BYPASS.
Adjusts the volume balance be-
tween the sound sent through
the delay (W) and the sound
that's not sent through the de-
lay (D).
Output level
35: CHORUS -> DELAY
fig.02-035m
Balance D
L in
Balance W
Chorus
Balance W
R in
Balance D
Parameter Value
Cho Rate 0.05-10.00 Hz
Cho Depth 0-127
Cho Delay 0.0-100.0 ms
Cho Balance # D100:0W-
D0:100W
Delay Time 0.0-500.0 ms
Dly Feedback -98-+98 %
Dly HF Damp 200-8000 Hz,
BYPASS
Dly Balance # D100:0W-
D0:100W
Level 0-127
36: FLANGER -> DELAY
fig.02-036m
Balance D
L in
Feedback
Balance W
Flanger
Balance W
R in
Balance D
Parameter Value
Flg Rate 0.05-10.00 Hz
Flg Depth 0-127
Flg Feedback -98-+98 %
Flg Delay 0.0-100.0 ms
Flg Balance # D100:0W-
D0:100W
Delay Time 0.0-500.0 ms
Dly Feedback -98-+98 %
Dly HF Damp 200-8000 Hz,
BYPASS
Dly Balance # D100:0W-
D0:100W
Level 0-127
L out
Balance D
Balance W
Delay
Balance W
Feedback
R out
Balance D
Description
Frequency of modulation
Depth of modulation
Adjusts the time until the cho-
rus is heard.
Volume balance between the
direct sound (D) and the cho-
rus sound (W)
Adjusts the time until the delay
is heard.
Adjusts the amount of the de-
lay sound that's fed back into
the effect. Negative (-) settings
invert the phase.
Adjusts the frequency above
which sound fed back to the ef-
fect is filtered out. If you do not
want to filter out any the high
frequencies, set this parameter
to BYPASS.
Adjusts the volume balance be-
tween the sound sent through
the delay (W) and the sound
that's not sent through the de-
lay (D).
Output level
L out
Balance D
Balance W
Delay
Balance W
Feedback
R out
Balance D
Description
Frequency of modulation
Depth of modulation
Adjusts the amount of the flanger
sound that's fed back into the ef-
fect. Negative (-) settings invert the
phase.
Adjusts the time until the flanger is
heard.
Volume balance between the direct
sound (D) and the flanger sound
(W)
Adjusts the time until the delay
sound is heard.
Adjusts the amount of the delay
sound that's fed back into the ef-
fect. Negative (-) settings invert the
phase.
Adjusts the frequency above
which sound fed back to the effect
is filtered out. If you do not want to
filter out any high frequencies, set
this parameter to BYPASS.
Adjusts the volume balance be-
tween the sound sent through the
delay (W) and the sound that's not
sent through the delay (D).
Output level