Editing The Effects; Saving A Studio Set, Tone, Or Song - Roland FA-06 Quick Start Manual

Synthesizer (Editing)

Editing the Effects

Here's how to edit the effects.
1.
Hold down the [SHIFT] button and press the [3] (Effects
Edit) button.
The EFFECTS EDIT screen appears.
Tone effect
Effect switch
MEMO
You can also access the EFFECTS EDIT screen from the menu
(p. 26).
Turning the effect on/off
1.
Use the cursor buttons to select the effect switch, and
use the dial to turn it on/off.

Saving a Studio Set, Tone, or Song

The edits that you make to a studio set, tone, or a recorded song are temporary. Your changes will be lost if you turn off the power, or if you select
another studio set, tone, or song. If you want to keep the edited content or the recorded song, you must save the respective data.
Studio Sets and tones that you save are saved in this unit's memory; songs are saved on the SD card.
NOTE
• When you save, the data that was previously in the save-destination is overwritten.
• In addition to the performance data, a song also contains information specifying the studio set. This means that if you edit the studio set or
tones that are used in the song, the song will no longer sound
the same.
1.
Press the [WRITE] button.
2.
Use the cursor buttons to select the item that you want
to save, and press the [ENTER] button.
3.
Press the [2] (Rename) button and assign a name.
Controller Explanation
Dial or [DEC] [INC] Specify the character that you want to enter.
[ ] [ ] Move the cursor.
Switch between uppercase and lowercase
[ ] [ ]
alphabetical characters.
[4] (Delete) Deletes the character at the cursor location.
[5] (Insert) Inserts a space (blank) at the cursor location.
[6] (Cancel) Cancels input and exits the naming screen.
[7] (OK) Confirms the name.
4.
Press the [7] (OK) button.
18
Studio set effect
Effect applied to the entire this unit
(System effect)
Editing the effect parameters
1.
Press a function button to enter the edit screen for each
effect.
2.
Use the cursor buttons to select a parameter, and use
the dial to change its value.
To return to the EFFECTS EDIT screen, press the [EXIT] button.
NOTE
The edits that you make to the effect settings are temporary. If
you turn off the power or select a different studio set or tone,
your changes will be lost. If you want to keep the changes
you made, save the tone, studio set, or system settings
respectively.
MEMO
For details on the parameters, refer to "Parameter Guide" (PDF).
Saving the system effect
The edits that you make to the system effect will be lost
when you turn off the power. If you want to keep the
changes you made, save them as follows.
1.
In the system effect edit screen, press the [6]
(System Write) button.
5.
Use the dial or the [DEC] [INC] buttons to select the save-
destination.
6.
Press the [7] (Write) button.
A confirmation message appears.
If you decide to cancel, press the [7] (Cancel) button.
7.
Press the [6] (OK) button.
The data is saved.
For details, refer to "Reference Manual"
(PDF)
The data is saved on this unit's memory or the SD card.
For more about the memory structure of this unit, refer to
"Overview" in "Reference Manual" (PDF).