Roland XV-2020 Owner's Manual page 36

Playing Sounds
fig.01-06e
Bank
USER
PSTA/B/C/D (PRESET)
GM (General MIDI)
EXP-A/B
Procedure
fig.01-07
1.
Press [VALUE] to make the PATCH indicator lights up.
Press the knob several times, until the PATCH indicator lights up.
2.
Turn [CATEGORY/BANK] to choose the bank (USER, PST-A/B/C/D,
GM, EXP-A/B)
3.
Turn [VALUE] to choose a Patch.
* You can listen to the selected patch sound by holding down [VOLUME]. At this time, the
currently selected preset bank USr (USER) and the patch number appear in alternation on
the display.
36
USER
Patch Patch Patch
PST-A
PST-B
PST-D
GM
EXP-A
Patch Patch Patch
EXP-B
3
1 2
page Description
p. 124 There are 128 patches stored in memory, which you can overwrite with patches you create your-
self.
p. 125 There are 512 patches (with 128 Patches in a single bank) stored in memory, which cannot be
overwritten
p. 129 These are patches for the General MIDI System, which is designed to standardize the specifica-
tions for MIDI functions for all manufacturers and models. There are 128 patches stored in mem-
ory, which cannot be overwritten.
--- These are banks for use with Wave Expansion Boards installed in the slots. Patches are stored in
memory on the separately available Wave Expansion Board, and cannot be overwritten.
1, 3
Patch
Patch
64
Patch number
2
You cannot select EXP-A or
EXP-B unless a Wave
Expansion Board is
installed into the
corresponding slot.
Turning [VALUE] rapidly
makes the value change in
large increments.