Roland XV-2020 Owner's Manual page 118

List of Parameters That Can Be Affected Using the XV-2020
RHYTHM parameter
Parameter Page
LEVEL p. 63
OUTPUT ASSIGN p. 63
GM parameter
Parameter
PART LEVEL
PART PAN
PART COARSE TUNE
PART FINE TUNE
PART TYPE (PATCH/RHYTHM)
PART NUMBER
REVERB SEND LEVEL
CHORUS SEND LEVEL
DRY SEND LEVEL
UTILITY parameter
Heading
Patch/Rhythm Set/Performance
Write
Transmitting Sound Settings
Initializing a Sound
Restoring the Factory Settings
Checking the Program Version
Others
Heading
Selecting a Part in a Performance
PATCH (PART) Receive Channel
Choosing a Patch
Listening to Demo Songs
118
Procedure
Press [VALUE] to make the RHYTHM indicator lights up. ->
While holding down [VOLUME], press [VALUE]. ->
Turn [CATEGORY/BANK] to choose the parameter you want to set. ->
Turn [VALUE] to select the desired setting. ->
While holding down [VOLUME], press [VALUE].
Page Procedure
p. 98 Press [VALUE] to make the GM indicator lights up. ->
p. 98
While holding down [VOLUME], press [VALUE]. ->
p. 98
Turn [CATEGORY/BANK] to choose the parameter you
p. 98
want to set. ->
p. 98
Turn [VALUE] to select the desired setting. ->
p. 98
While holding down [VOLUME], press [VALUE].
p. 97
p. 97
p. 97
Page Procedure
p. 92 While holding down [VOLUME], press [VALUE]. ->
Rotating [CATEGORY/BANK] to select UTILITY. ->
Rotating [VALUE] to select "wrt". ->
Press [VALUE] to select the write-destination Patch number,
rotating [VALUE] to select the write-destination number. ->
Press [VALUE] to recheck. ->
Press [VALUE] to execute
p. 93 While holding down [VOLUME], press [VALUE]. ->
Rotating [CATEGORY/BANK] to select UTILITY. ->
Rotating [VALUE] to select "dtr". ->
Press [VALUE] to recheck. ->
Press [VALUE] to execute
p. 92 While holding down [VOLUME], press [VALUE]. ->
Rotating [CATEGORY/BANK] to select UTILITY. ->
Rotating [VALUE] to select "ini". ->
Press [VALUE] to recheck. ->
Press [VALUE] to execute
p. 12 While holding down [VOLUME], press [VALUE]. ->
Rotating [CATEGORY/BANK] to select UTILITY. ->
Rotating [VALUE] to select "Fct". ->
Press [VALUE] to recheck. ->
Press [VALUE] to execute
p. 95 While holding down [VOLUME], press [VALUE]. ->
Rotating [CATEGORY/BANK] to select UTILITY. ->
The version is indicated when [VALUE] is rotated
Page Procedure
p. 71 Turn [PART]
p. 94 Turn [PATCH RX CH] ([PART])
p. 35 Turn [CATEGORY/BANK], Turn [VALUE]
refer to p. 1