[E] Resetting Error Log; [F] Resetting Compressor Operating Hours; [G] Reducing Compressor Starting Time - Hoshizaki FM-150KE(-N) Service Manual

[e] RESETTING ERROR LOG

With the operation switch in the "OFF" position, press and hold the stop and maintenance A
buttons. Move the operation switch to the "ON" position. Release the buttons when the
display shows the ice mode. Now the error log is reset. Do not reset more than necessary.

[f] RESETTING COMPRESSOR OPERATING HOURS

With the power switch turned off, press and hold the ice, stop and maintenance A buttons.
Move the operation switch to the "ON" position. Release the buttons when the display shows
the ice mode. Now the compressor operating hours are reset.
When the compressor starts in 15 seconds after the water supply cycle ends, the error log is
not set to be updated. After resetting the compressor operating hours, move the operation
switch to the "OFF" position, turn off the power switch, and turn it back on.

[g] REDUCING COMPRESSOR STARTING TIME

With the power switch turned off, press and hold the maintenance A button. Move the
operation switch to the "ON" position. Release the button when the display shows the ice
mode.
The compressor starts in 30 seconds after the water supply cycle ends
32