BenQ M2700HD Service Manual page 13

BenQ M2700HD
[MENU]
[Enter]
[▲], [▼]
[POWER]
[Auto]
4.2.3.2 OSD Control
The On-Screen Display (OSD) shall be an easy to use icon based menu through keypad OSD
buttons or remote control unit. The unit shall leave the factory with all OSD controls set to their
default values
First level Second level
Auto Adjustment
H. Position
V. Position
DISPLAY
Pixel Clock
Brightness
Sharpness
Gamma
PICTURE
Color
D. When OSD displays, press [MENU] to return to previous level menu
E. When OSD isn't shown on screen, press [MENU] to enter OSD interface
F. Press [MENU] to enter Service Page When OSD isn't shown on screen in Service
Page Mode
C. When OSD displays, press [Enter] to perform function of menu icon that is
highlight or enter next level menu
D. When OSD isn't shown on screen, press[Enter] to change input source
A. When "MENU OSD" displays, press these keys to change the contents of an
adjustment item, or change an adjustment value
B. When "MENU OSD" un-displays, press [▲] to show Volume Menu
press [▼] to Show Picture Mode Menu.
C. Press [▲] for 3 sec.
audio at mute status, press the
Mute
D. Press [▲]to show Volume Hot Key Menu, this Menu elapsed time depend on the
Display Time of OSD
Power on or power off the monitor
press [Auto] to perform auto-adjustment
Third level
-
(0~100)
(0~100)
(0~100)
(0~63)
Phase
(0~100)
Contrast (0~100)
(0~10)
(Gamma
1.8~Gamma 2.6)
*Color
Temperature
will display the "mute " message for 3 sec. when
for 3 sec again, will release Audio
[▲]
Fourth level
-
-
-
-
-
-
-
-
Normal(6500K)
Bluish(9300K)
Reddish(5800K)
User Mode
Red (0~100)
Green (0~100)
Blue (0~100)
12
Service Manual
Default
-
50
50
50
-
非 Eco Mode:90
Eco Mode:25
50
3
Preset Gamma
2.2
(Gamma
1.8,2.0,2.2,2.4,2.6
)
Normal
-
-
Adjustment 0-100
( preset 100)