Fn1 Substitution Values - Motorola Symbol DS3407 Reference Manual

Hide thumbs Also See for Symbol DS3407:
Table of Contents

Advertisement

11 - 6 Symbol DS3407 Product Reference Guide
Scan Data Transmission Format (continued)
<PREFIX> <DATA> <SUFFIX 2>

FN1 Substitution Values

Key Category Parameter # 67h
Decimal Value Parameter # 6Dh
The Wedge and USB HID Keyboard hosts support a FN1 Substitution feature. Enable this to substitute any FN1
character (0x1b) in an GS1-128 bar code with a value. This value defaults to 7013 (Enter Key).
When using host commands to set the FN1 substitution value, set the key category parameter to 1, then set the
3-digit keystroke value. See the ASCII Character Set table for the current host interface for the desired value.
To select a FN1 substitution value via bar code menus:
Scan the bar code below.
1.
Locate the keystroke desired for FN1 Substitution in the ASCII Character Set table for the current host
2.
interface. Enter the 4-digit ASCII Value by scanning each digit in
To correct an error or change the selection, scan Cancel.
To enable FN1 substitution for USB HID keyboard, scan the Enable FN1 Substitution bar code on
(06h)
Set FN1 Substitution Value
<PREFIX> <DATA> <SUFFIX 1>
(05h)
<PREFIX> <DATA> <SUFFIX 1> <SUFFIX 2>
(07h)
Appendix D, Numeric Bar
Codes.
page
8-10.

Advertisement

Table of Contents
loading

Table of Contents