Level The Indoor Cycle - CycleOps Phantom series User Manual

Seat
F
4. Attach seat to seat post clamp.

Level the Indoor Cycle

Move the indoor cycle to where it will be used and level it by rotating the adjustable feet underneath the stabilizers. Level-
ing the indoor cycle helps ensure a stable and quiet ride and reduces wear on the frame. When adjusted properly, there is
no rocking movement from one foot to the other.
Leveler Feet
Rear stabilizer
Front stabilizer
1. If necessary, the four outer leveler
feet can be adjusted. Turn stabilizer
feet clockwise to lower the indoor
cycle. Turn stabilizer feet counter-
clockwise to raise indoor cycle.
Seat post
clamp
G
5. Loosen the 6mm bolt and place seat
rails within the clamp. Adjust to de-
sired seat placement using 6mm Allen
wrench.
Lock Nut
A
B
2. Secure the leveler feet by tightening
the lock nuts, with the multi-purpose
wrench, flush against the bottom of the
rear and/or front stabilizer.
Seat
F
Seat post
clamp
G
A
Rear stabilizer
B
Front stabilizer
Seat post
E
6. Secure the plastic end cap to the
seat post using two end cap screws
with the Phillips screwdriver side of
the 6mm Allen wrench.
K
End cap
5