Installing "Image Transfer - Sony Cyber-Shot DSC-P9 Operating Instructions Manual

filename[D:\Documents and Settings\YAMANE\My Documents\WORKS\DSCP92\3082719111\3082719111DSCP92UC\02GB-
DSCP92UC\13adv.FM]
01cov.book Page 76 Tuesday, February 18, 2003 3:07 PM

Installing "Image Transfer"

You can use the "Image Transfer" software
to copy images to your computer
automatically when you connect the camera
to your computer.
a Click [Cyber-shot] on the
model selection screen.
The installation menu screen appears.
b Click [Image Transfer] on the
installation menu screen.
Select the desired language,
then click [OK].
The "Welcome to the InstallShield
Wizard" screen appears.
• This section describes the English screen.
76
c Click [Next]. When "License
Agreement" screen appears,
click [Yes].
Read the agreement carefully. If you
accept the terms of the agreement,
proceed with the installation. The
"Information" screen appears.
d Click [Next].
masterpage:Left
e Select the folder to be
installed, then click [Next].
Select the program folder, then
click [Next].
f Confirm if the checkbox is
checked on the "Image
Transfer Settings" screen,
then click [Next].
When the installation is completed, the
screen informs you of completion.
model name1[DSC-P92]
[3-082-719-11(1)]