Viewing Images On A Tv Screen - Sony Cyber-Shot DSC-P9 Operating Instructions Manual

filename[D:\Documents and Settings\YAMANE\My Documents\WORKS\DSCP92\3082719111\3082719111DSCP92UC\02GB-
DSCP92UC\06BAS.FM]
01cov.book Page 34 Tuesday, February 18, 2003 3:07 PM

Viewing images on a TV screen

A/V connecting cable (supplied)
A/V OUT
1
(MONO) jack
, Connect the supplied A/V
connecting cable to the A/V
OUT (MONO) jack of the
camera and the audio/video
input jacks of the TV.
If your TV has stereo type input jacks,
connect the audio plug (black) of the A/V
connecting cable to the Lch audio input
jack.
• Turn off both the camera and the TV before
connecting the camera and the TV with the A/V
connecting cable.
34
2
TV/Video switch
, Turn on the TV, and set the TV/
Video switch to "Video."
• The name and location of this switch may differ
depending on your TV. For details, refer to the
operating instructions supplied with the TV.
masterpage:Left
VGA
2 / 9
101
101-0002 2003 7 4 10:30
BACK/NEXT VOLUME
3
, Set the mode selector to
and turn on the camera.
Press b/B on the control button to select the
desired image.
• When using the camera abroad, it may be
necessary to switch the video output signal to
match that of your TV system (page 103).
model name1[DSC-P92]
[3-082-719-11(1)]
PM
,