On The Index (Triple-Image) Screen - Sony Cyber-Shot DSC-P9 Operating Instructions Manual

filename[D:\Documents and Settings\YAMANE\My Documents\WORKS\DSCP92\3082719111\3082719111DSCP92UC\02GB-
DSCP92UC\11adv.fm]
01cov.book Page 64 Tuesday, February 18, 2003 3:07 PM
h Select [OK] with B, then press
z.
The - mark turns white and the
selected image is protected.
To cancel the protection
In Step 4, select [Cancel], or in Step 8,
select [Exit].
To release protection
In Step 5, select an image for which you
want to release protection with v/V/b/B
and press z. The - mark turns gray and
repeat this operation for all the images for
which you want to release protection. Then,
press MENU, select [OK], and press z.
To protect all the images in
folder
In Step 4, select [All In Folder], then press
z. Next, select [On], then press z.
To release protection of all the
images in the folder
In Step 4, select [All In Folder], and press
z. Then select [Off], and press z.
64
On the Index (triple-image)
screen
a Set the mode selector to
press the zoom W (index)
button twice to switch to the
Index (triple-image) screen.
b Move the image you want to
protect to the center with b/B.
c Press MENU.
The menu appears.
d Select [Protect] with v/V, then
press z.
The center image is protected, and the
- (Protect) mark is indicated on that
image.
DPOF
Protect
Folder
101-0002 2003 7 4 10:30
PM
OK BACK/NEXT
e To protect other images, move
the image you want to protect
to the center with b/B, and
repeat Step 4.
masterpage:Left
To release protection
In Step 4, select the image from which
you want to release protection, and press z.
,
To release protection from all of your
images, repeat this process for each of them.
model name1[DSC-P92]
[3-082-146-11(1)]