Sony KP-51HW40 Service Manual page 28

7) Select "GRN SKEW", and correct the tilt of horizontal lines
and vertical lines.
• GRN SKEW (horizontally/vertically)
Push the joystick
to B
Push the joystick
to v
8) Select "GRN SIZE", and adjust so that each distance from
center to left end and to right end is equal. Adjust so that
each distance from center to top and to bottom is equal.
• GRN SIZE (horizontally/vertically)
Push the joystick
to B
Push the joystick
to v
9) Select "GRN LIN", and adjust so that each space at the right
end and at the left end of screen is equal. Adjust so that each
space at the top and at the bottom of screen is equal.
• GRN LIN (horizontally/vertically)
Push the joystick
to B
Push the joystick
to v
10) Select "GRN MSIZ", and correct the space intervals for the
• GRN MSIZ (horizontally)
Push the joystick
to b
Push the joystick
to B
11) Select "GRN MLIN", and correct the sizes of the horizontal
• GRN MLIN (horizontally)
Push the joystick
to V
Push the joystick
to B
Note: The SIZE and LIN, MSIZ and MLIN adjustments are
Push the joystick
to b
12) Select "GRN PIN", and adjust so that right and left vertical
• GRN PIN (horizontally/vertically)
Push the joystick
to V
13) Select "GRN KEY", and adjust so that upper and lower hori-
Push the joystick
to b
• GRN KEY (vertically)
Push the joystick
to v
Note: The VPINand KEY adjustments are affected each other.
Push the joystick
to V
– 28 –
horizontal section of the screen are equal.
line at the center of the screen are symmetrical left and right.
affected each other.
So adjust these mutually if necessary.
lines on the screen become straight. Adjust so that upper and
lower horizontal lines on the screen become straight.
Push the joystick
to B
Push the joystick
to v
zontal lines on the screen become parallel.
So adjust these mutually if necessary.
KP-51HW40/57HW40
RM-Y909 RM-Y909
Push the joystick
to b
Push the joystick
to b
Push the joystick
to b
Push the joystick
to V
Push the joystick
to V