Download  Print this page

Connecting A Digital Tv Receiver - Sony KP-51HW40 Service Manual

Color rear video projector.
Hide thumbs

Advertisement

Installing and Connecting the Projection TV

Connecting a Digital TV Receiver

z
Be sure to read the
Set-top box manual.
Digital TV Set-top box
28
Disconnect all power sources before making any connections.
1
Using three separate component video cables, connect the Digital TV
Set-top box's Y, P
B
The Y, P
and P
B
be connected to provide sound.
Component video connection is necessary to view 480p, 720p, and
1080i formats. You may also use the S VIDEO or Composite Video
connections, however, component video (Y, P
best picture quality for all format types.
2
Using an audio cable, connect the Digital TV Set-top box's Audio OUT
jacks to the projection TV's AUDIO IN jacks.
VMC-10HG (not supplied)
RK-74A (not supplied)
You cannot record the signal from any equipment connected into the
Y, P
and P
connectors.
B
R
This projection TV is not compatible with digital TV receivers
configured with RGB or VGA output connectors.
and P
jacks to the projection TV.
R
jacks do not provide audio, so audio cables must
R
AUDIO-R (red)
AUDIO-L (white)
, P
) will provide the
B
R
P
R
P
B
Y
Rear of
projection TV

Advertisement

Table of Contents

   Related Manuals for Sony KP-51HW40

This manual is also suitable for:

Kp-57hw40

Comments to this Manuals

Symbols: 0
Latest comments:
  • #1202186 Sep 19, 2018 12:39:
    I CAN'T GET AN ANSWER TO A SIMPLE QUESTION FROM THE SERVICE MANUAL: INSTRUCTIO​NS ON HOW TO REPLACE THE LAMP ON MT REAR PROJECTION SONY TV KP51HW40