Installing and Connecting the Projection TV
Connecting an AV Receiver
For greater control of all audio and video equipment, connect an AV receiver.
Change "Video Label" for the VIDEO 1 input to "Receiver" (see page 59).
Disconnect all power sources before making any connections.
Connect the coaxial cable from the incoming cable connection or
antenna to IN on the VCR.
Using a coaxial cable, connect OUT on the VCR to VHF/UHF on the
Using a VIDEO cable, connect VIDEO of VIDEO 1 IN on the
projection TV to MONITOR OUT on the AV receiver.
Using an AUDIO/VIDEO cable, connect TV OUT on the projection TV
to AUDIO/VIDEO 2 IN on the AV receiver.
Using an AUDIO/VIDEO cable, connect the video equipment to the AV
Select the Setup menu and set "Video Label" to "Receiver" to fix your
TV's input to AV receiver (see "Video Label" on page 59).
Rear of projection TV
VMC-810S/820S (not supplied)
VMC-10HG (not supplied)
Coaxial cable (not supplied)
VIDEO 2 IN
VIDEO 1 IN
AUDIO/VIDEO 1 OUT