Sony KP-51HW40 Service Manual
  1. Manuals
  2. Brands
  3. Sony Manuals
  4. Projection TV
  5. KP 51HW40
  6. Service manual
Sony KP-51HW40 Service Manual

Sony KP-51HW40 Service Manual

Color rear video projector
Hide thumbs Also See for KP-51HW40:
Table of Contents

Advertisement

Quick Links

See also: Operating Instructions

SERVICE MANUAL

MODEL
COMMANDER
––––––
––––––––––––
KP-51HW40
RM-Y909
KP-51HW40
RM-Y909 Canadian SCC-P65G-A
KP-57HW40
RM-Y909
KP-57HW40
RM-Y909 Canadian SCC-P65F-A
RM-Y909
DEST. CHASSIS NO.
––––– –––––––––––
US
SCC-P65G-A
US
SCC-P65F-A
KP-51HW40/57HW40
COLOR REAR VIDEO PROJECTOR
RA-6
MODEL
COMMANDER
––––––
––––––––––––
CHASSIS
DEST. CHASSIS NO.
––––– –––––––––––

Advertisement

Table of Contents
loading

Related Manuals for Sony KP-51HW40

Summary of Contents for Sony KP-51HW40

  • Page 1: Service Manual

    RA-6 CHASSIS MODEL COMMANDER DEST. CHASSIS NO. MODEL COMMANDER DEST. CHASSIS NO. –––––– –––––––––––– ––––– ––––––––––– –––––– –––––––––––– ––––– ––––––––––– KP-51HW40 RM-Y909 SCC-P65G-A KP-51HW40 RM-Y909 Canadian SCC-P65G-A KP-57HW40 RM-Y909 SCC-P65F-A KP-57HW40 RM-Y909 Canadian SCC-P65F-A RM-Y909 KP-51HW40/57HW40 COLOR REAR VIDEO PROJECTOR...
  • Page 2 KP-51HW40/57HW40 RM-Y909 RM-Y909 SAFETY CHECK-OUT ( US model only ) LEAKAGE TEST After correcting the original service problem, perfom the follow- ing safety checks before releasing the set to the customer: The AC leakage from any exposed metal part to earth ground and l.
  • Page 3 ARE CRITICAL TO SAFEOPERATION ARE IDENTIFIED IN THIS NUMÉRO DE PIÉCE EST INDIQUÉ DANS LE PRÉSENT MAN- MANUAL. FOLLOW THESE PROCEDURES WHENEVER CRITI- UEL OU DANS DES SUPPLÉMENTS PUBLIÉS PAR SONY. LES CAL COMPONENTS ARE REPLACED OR IMPROPER OPERA- RÉGLAGES DE CIRCUIT DONT L’IMPORTANCE EST CRITIQUE TION IS SUSPECTED.

  • Page 4: Table Of Contents

    KP-51HW40/57HW40 RM-Y909 RM-Y909 TABLE OF CONTENTS Section Title Page Section Title Page –––––– –––– –––– –––––– –––– –––– 1. SELF DIAGNOSIS FUNCTION ......5. SAFETY RELATED ADJUSTMENTS 2. DISASSEMBLY 5-1. HV REGULATION CIRCUIT CHECK AND ADJUSTMENT ............33 2-1. REAR BOARD REMOVAL ........8 5-2.

  • Page 5: Self Diagnosis Function

    KP-51HW40/57HW40 RM-Y909 RM-Y909 SECTION 1 SELF DIAGNOSIS FUNCTION Summary of Self-Diagnosis Function • This device includes a self-diagnosis function. • In case of abnormalities, the TIMER/STAND BY indicator automatically blinks. It is possible to predict the abnormality location by the number of blinks. The Instruction Manual describes blinking of the TIMER/STAND BY indicator.
  • Page 6 KP-51HW40/57HW40 RM-Y909 RM-Y909 Self-diagnosis screen displays • In cases of malfunctions where it is not possible to determine the symptom such as when the power goes off occasionally or when the screen disappears occasionally, there is a screen display on whether the malfunction occurred or not in the past (and whether the detection circuit operated or not) in order to allow confirmation.
  • Page 7 KP-51HW40/57HW40 RM-Y909 RM-Y909 6. Self-diagnosis function operation Low B and +B line detect DET SHORT, and shut-down POWER ON RELAY. Reset by turning power on/off. In case of +B is loaded approx. 1.5A or more, microcomputer detects it via IC5005 In case of +B becomes approx.

  • Page 8: Disassembly

    KP-51HW40/57HW40 RM-Y909 RM-Y909 SECTION 2 DISASSEMBLY 2-1. REAR BOARD REMOVAL 2-3. SERVICE POSITION 1 Disconnect CN17, 18, 19 on A board. From V boards CN9001. (The extension cable is not supplied because of the A board countermeasure for radiation.) CN17, 18, 19...

  • Page 9: H1 Board Removal

    KP-51HW40/57HW40 RM-Y909 RM-Y909 2-5. H1 BOARD REMOVAL 2-7. MIRROR COVER REMOVAL 1 Twenty three screws, dome washer HEX tap 4x20 2 Bracket H1 1 Two screws (+BVTP4x12) 6 Button, power 4 H1 board 7 Guide, LED 3 Screw (+BVTP3x12) 5 Screw...

  • Page 10: H4 Board And S Board Removal

    KP-51HW40/57HW40 RM-Y909 RM-Y909 2-9. H4 BOARD AND S BOARD REMOVAL 2-11. G BOARD REMOVAL 2 Claws 8 S board 3 Bracket G Sensor 2 Claw bracket (B) 1 screw 2 Claw (+BVTP4x12) 6 Clows 4 Four screws 4 Two screws...

  • Page 11: Picture Tube Removal

    KP-51HW40/57HW40 RM-Y909 RM-Y909 2-13. PICTURE TUBE REMOVAL CAUTION: Removing the arrow-marked screws is strictly prohibited. If removed, it may cause liquid spill. 4 Four screws, Lens dome washer HEX tap 4x20 Picture tube 5 Lens 2 Four screws, !™ Four screws...

  • Page 12: Set-Up Adjustments

    KP-51HW40/57HW40 RM-Y909 RM-Y909 SECTION 3 SET-UP ADJUSTMENTS the mode Cover the both green and red picture lenses with the 3-1. SCREEN VOLTAGE ADJUSTMENT lens caps is aligned the same as was done for green. (COARSE ADJUSTMENT) 1. Receive the Monoscope signal.

  • Page 13: 2-Pole Magnet Adjustment

    KP-51HW40/57HW40 RM-Y909 RM-Y909 3-5. FOCUS VR ADJUSTMENT 3-7. CENTERING MAGNET ADJUSTMENT 1. Set generator to crosshatch. 1. Set the picture mode to “Pro”. 2. Cover the both red and blue picture lenses with the lens caps 2. Receive the monoscope signal.

  • Page 14: Commander

    KP-51HW40/57HW40 RM-Y909 RM-Y909 7. If you want to recover the latest values press - then [ENTER] to 3-10.ELECTRICAL ADJUSTMENT BY REMOTE read the memory. COMMANDER 8. Press [MUTING] then [ENTER] to write into memory. By using Remote Commander (RM-Y909),all circuit adjustments 9.
  • Page 15 KP-51HW40/57HW40 RM-Y909 RM-Y909 – 15 –...
  • Page 16 KP-51HW40/57HW40 RM-Y909 RM-Y909 – 16 –...
  • Page 17 KP-51HW40/57HW40 RM-Y909 RM-Y909 – 17 –...
  • Page 18 KP-51HW40/57HW40 RM-Y909 RM-Y909 – 18 –...
  • Page 19 KP-51HW40/57HW40 RM-Y909 RM-Y909 – 19 –...
  • Page 20 KP-51HW40/57HW40 RM-Y909 RM-Y909 – 20 –...
  • Page 21 KP-51HW40/57HW40 RM-Y909 RM-Y909 – 21 –...
  • Page 22 KP-51HW40/57HW40 RM-Y909 RM-Y909 – 22 –...
  • Page 23 KP-51HW40/57HW40 RM-Y909 RM-Y909 – 23 –...
  • Page 24 KP-51HW40/57HW40 RM-Y909 RM-Y909 – 24 –...

  • Page 25: Registration Adjustment

    KP-51HW40/57HW40 RM-Y909 RM-Y909 3-11. REGISTRATION ADJUSTMENT 3-11-1. Setup for Adjustment 1. Marking • ADJUSTING FLOW 1) At the 4 insides of the screen, locate the middle. Use a tape START measure to identify the middle. 2. Data Setting Turn on the power and wait for 10 minutes.
  • Page 26 KP-51HW40/57HW40 RM-Y909 RM-Y909 3-11-3. Operation Method for Projector Engine • Press joy : Switches marker moving method. Mode stick (in fine adjustment mode) joystick (v, V, b, B) keys c 1 and 4 buttons MUTING TV POWER Commander Function Buttons...
  • Page 27 KP-51HW40/57HW40 RM-Y909 RM-Y909 3. Operation Method for Fine Adjustment 3-11-4. PJE Adjustment (Sub Deflection Adjustment) 1) Select the PJE mode. 2) Select FDIS so that the data at each position can be displayed Adjustment a : Yes – : No in the fine adjustment mode, and set the data to “01”.
  • Page 28 KP-51HW40/57HW40 RM-Y909 RM-Y909 7) Select “GRN SKEW”, and correct the tilt of horizontal lines 10) Select “GRN MSIZ”, and correct the space intervals for the and vertical lines. horizontal section of the screen are equal. • GRN SKEW (horizontally/vertically) • GRN MSIZ (horizontally)

  • Page 29: Auto Registration Error Code List

    KP-51HW40/57HW40 RM-Y909 RM-Y909 <Copy All Registration Data to Other modes> 14) Press “9” button on the commander to enter the fine adjust- ment mode. 1. Make sure that the adjustment for NTSC Full mode finished 15) Make fine adjustment so that horizontal lines and vertical and the data have already been written.
  • Page 30 KP-51HW40/57HW40 RM-Y909 RM-Y909 ERROR CODE LIST ERROR DESCRIPTION REMEDY CODE No Error Sensor 0 low output Check sensor 0, connection/wiring, circuit, and pattern position (Is pattern over sensor ?) Adjust “64 VUP” if necessary. Sensor 1 low output Check sensor 1, connection/wiring, circuit, and pattern position (Is pattern over sensor ?) Adjust “69 HLB”...

  • Page 31: Circuit Adjustments

    KP-51HW40/57HW40 RM-Y909 RM-Y909 SECTION 4 CIRCUIT ADJUSTMENTS 4-1. P & P SUB CONTRAST ADJUSTMENT 4-3. P & P SUB-HUE AND SUB-COLOR ADJUSTMENT (VIDEO) (SCON) (SHUE, SCOL) 1. Receive the signal. 1. Receive the signal. TV terminal (sub) : Color-bar (white-75%, 7.5% TV terminal (sub) : Color-bar (white-75%, 7.5%...

  • Page 32: Blue Offset Adjustment

    KP-51HW40/57HW40 RM-Y909 RM-Y909 4-5. BLUE OFFSET ADJUSTMENT 1. Receive the all black (1080i, component) signal with VIDEO 5 input, and set PICTURE to maximum. 2. Connect an oscilloscope between CN5 7 pin (B) on the A board and ground. 3. Set in the service mode and select the category “ 2150D-2 ”.

  • Page 33: Safety Related Adjustments

    KP-51HW40/57HW40 RM-Y909 RM-Y909 SECTION 5 SAFETY RELATED ADJUSTMENTS [ D BOARD] 5-2. HV HOLD DOWN CIRCUIT OPERATION 5-1. HV REGULATION CIRCUIT CHECK AND CHECK AND ADJUSTMENT ADJUSTMENT When replacing the following components marked with ollowing components marked with on the...

  • Page 34: Diagrams

    SECTION 6 KP-51HW40/57HW40 RM-Y909 RM-Y909 DIAGRAMS 6-1. BLOCK DIAGRAM (1) (VIDEO/AUDIO IN/OUT) J2004 MONITOR Q2005 AUDIO IC2003 IC2004 BUFFER A/V SWITCH VIDEO Q2006 Q2012, 2026 MAIN TUNER CN2001 CN2001(1/2) BUFFER MONITOR V OUT (2/2) MAIN TU V MAIN TU V...

  • Page 35: Block Diagram (2)

    KP-51HW40/57HW40 RM-Y909 RM-Y909 5-1. BLOCK DIAGRAM (2) IC4 4MBEDO IO0-IO16 A0-A8 2-5,7-10 16-19,22-26 13 27 28 31-34,36-39 IC303 YCT-MAIN 28-13 9-2,99 11 12 10 Y-IN YOUT CB-M Y1-IN CBOUT CR-M CROUT C-IN 3D COMB FILTER ACOI IC302 MAIN-CCD V-CHIP XTAL...

  • Page 36: Block Diagram (4)

    KP-51HW40/57HW40 RM-Y909 RM-Y909 5-1. BLOCK DIAGRAM (3) IC305 YCT-SEL +3.3V CB-M CB-M CB-O CB-S CB-S CR-M CR-M CR-O CR-S CR-S IC308 IC309 ID-1 DECODER X306 V SHIFT VCOMP 14.318MHz CERA V DRIVE+ VSIN DAT1 V_DRV+ X307 CLK1 V DRIVE– VDIN 2.7MHz...

  • Page 37: Block Diagram (6)

    KP-51HW40/57HW40 5-1. BLOCK DIAGRAM (4) RM-Y909 RM-Y909 DYO2 DYO9 DRO2 D(B)8 DRO9 DBO2 DBO9 C54O UDOM DQ15 TH-Y ADDR11 TH-CB TH-CR LEVEL SHIFT Y-CL Q3404 LEVEL CB-CL SHIFT Q3402 CR-CL – 37 –...

  • Page 38: Block Diagram (8)

    KP-51HW40/57HW40 RM-Y909 RM-Y909 5-1. BLOCK DIAGRAM (5) S-HD S-VD – 38 –...

  • Page 39: Block Diagram (6)

    KP-51HW40/57HW40 RM-Y909 RM-Y909 5-1. BLOCK DIAGRAM (6) (4/5) ( 1/2 ) ( PJED CPU ) (I/V CONV.) (SENSOR) IC11 CN12 CN1601 (X/X) IC11 CN3001 CN10 I HP SENSOR LEFT I DREG OVF I DREG BSY I DREG ACK UPPER (SENSOR)

  • Page 40: Block Diagram (7)

    KP-51HW40/57HW40 RM-Y909 RM-Y909 5-1. BLOCK DIAGRAM (7) RE-R RE-G Q1604 PROT RE-B Q1605 PROT RE-YS ( 2/2 ) ( REGI CORR ECTON) – 40 –...

  • Page 41: Block Diagram (8)

    KP-51HW40/57HW40 RM-Y909 RM-Y909 5-1. BLOCK DIAGRAM (8) ( 5/5 ) (A UDIO, SYSTEM CONTROL ) IC711 IC708 AUDIO PROCESSOR L,R AMP CN6 (1/3) CN705 TO U IN(L) SP(L) AUDIO L L OUT1 OUT(L) BOARD IN(R) AUDIO R R OUT2 IN-(L) CN2001 L.E.

  • Page 42: Block Diagram (9)

    KP-51HW40/57HW40 RM-Y909 RM-Y909 5-1. BLOCK DIAGRAM (9) IC8002 CONV.OUT1 IC8008 H DRIVE DY(B) MIX+ V.DEF ERR OUT T8004 V.MID D+200V D8039 ERR IN +135V V.RET D8022 +135V SLOW VR REG D8037 MUTE VR8022 IC8007 D8008 REF IN IC8001 MIX– CONV.OUT1...

  • Page 43: Block Diagram (10)

    KP-51HW40/57HW40 RM-Y909 RM-Y909 BLOCK DIAGRAM (10) (R DRIVE) (G DRIVE) IC7101 IC7201 VIDEO OUT CN7108 CN7102 VIDEO OUT CN7209 CN7202 V IN- V OUT V IN- V OUT 4, 5, BOARD 9, 11 V902 BUFFER BOARD CN704 BUFFER Q7103 CN703...

  • Page 44: Block Diagram (11)

    KP-51HW40/57HW40 RM-Y909 RM-Y909 5-1. BLOCK DIAGRAM (11) T6001 D5003 CN5002 CN6005 IC6003 LINE AC IN AC (H) AU 19V D6007 FILTER DRIVER 120VAC F6001 L6001, 60Hz AC (L) A BOARD 6002 CONV. VG (H) CN706 D5026 Q6006 AU -19V RELAY...

  • Page 45: Circuit Boards Location

    KP-51HW40/57HW40 RM-Y909 RM-Y909 6-2. CIRCUIT BOARDS LOCATION Terminal name of semiconductors in silk screen Note: The symbol display is on the component slde. printed circuit ( Device Printed symbol Terminal name Circuit The components identified by shading and mark Collector are critical for safety.
  • Page 46 KP-51HW40/57HW40 RM-Y909 RM-Y909 – 46 –...
  • Page 47 KP-51HW40/57HW40 RM-Y909 RM-Y909 :LAV35 – 47 –...
  • Page 48 KP-51HW40/57HW40 RM-Y909 RM-Y909 100*4 – 48 –...
  • Page 49 KP-51HW40/57HW40 RM-Y909 RM-Y909 – 49 –...
  • Page 50 KP-51HW40/57HW40 RM-Y909 RM-Y909 – 50 –...
  • Page 51 KP-51HW40/57HW40 RM-Y909 RM-Y909 HP IN TO A5/9,A1/9_51 (Y/C JUNGLE) – 51 –...
  • Page 52 KP-51HW40/57HW40 RM-Y909 RM-Y909 (COMPONENT I/F, ID-1 DECODER) – 52 –...
  • Page 53 KP-51HW40/57HW40 RM-Y909 RM-Y909 S-ATT TO A7/9,A2/9_13 S-MODE1 TO A7/9,A2/9_14 (SYSTEM CONTROL) – 53 –...
  • Page 54 KP-51HW40/57HW40 RM-Y909 RM-Y909 (SHADING) – 54 –...
  • Page 55 KP-51HW40/57HW40 RM-Y909 RM-Y909 (AUDIO) – 55 –...
  • Page 56 KP-51HW40/57HW40 RM-Y909 RM-Y909 (DIGITAL REG1, PJED CPU) – 56 –...
  • Page 57 KP-51HW40/57HW40 RM-Y909 RM-Y909 (PJE DRIVE) – 57 –...
  • Page 58 KP-51HW40/57HW40 RM-Y909 RM-Y909 – 58 –...
  • Page 59 KP-51HW40/57HW40 RM-Y909 RM-Y909 – 59 –...
  • Page 60 KP-51HW40/57HW40 RM-Y909 RM-Y909 – 60 –...
  • Page 61 KP-51HW40/57HW40 RM-Y909 RM-Y909 – 61 –...
  • Page 62 KP-51HW40/57HW40 RM-Y909 RM-Y909 – 62 –...
  • Page 63 KP-51HW40/57HW40 RM-Y909 RM-Y909 – 63 –...
  • Page 64 KP-51HW40/57HW40 RM-Y909 RM-Y909 – 64 –...
  • Page 65 KP-51HW40/57HW40 RM-Y909 RM-Y909 14.6 14.6 -2.6 -2.3 -2.8 -2.8 -2.3 -2.3 -20.6 112.3 11.9 131.1 -0.3 11.9 -0.5 – 65 –...
  • Page 66 KP-51HW40/57HW40 RM-Y909 RM-Y909 – 66 –...
  • Page 67 KP-51HW40/57HW40 RM-Y909 RM-Y909 – 67 –...
  • Page 68 KP-51HW40/57HW40 RM-Y909 RM-Y909 – 68 –...
  • Page 69 KP-51HW40/57HW40 RM-Y909 RM-Y909 – 69 –...
  • Page 70 KP-51HW40/57HW40 RM-Y909 RM-Y909 – 70 –...
  • Page 71 KP-51HW40/57HW40 RM-Y909 RM-Y909 – 71 –...
  • Page 72 KP-51HW40/57HW40 RM-Y909 RM-Y909 SCL TO U3/3, U1/3, U2/3_5 SDA TO U3/3, U1/3, U2/3_4 – 72 –...
  • Page 73 KP-51HW40/57HW40 RM-Y909 RM-Y909 – 73 –...

  • Page 74: Printed Wiring Boards

    KP-51HW40/57HW40 6-4. PRINTED WIRING BOARDS RM-Y909 RM-Y909 [ TUNER, VIDEO, AUDIO, SYSTEM CONTROL ] – A Board – A BOARD DIODE TRANSISTOR D317 G-10 D318 D-12 D319 D701 D-12 H-10 D704 D-12 I-11 D705 A-12 D-13 D710 F-11 Q302 D711...
  • Page 75 KP-51HW40/57HW40 RM-Y909 RM-Y909 [ TUNER, VIDEO, AUDIO, SYSTEM CONTROL ] – A Board – A BOARD DIODE Q301 Q304 D307 Q306 D312 C-11 Q309 D-11 D321 E-12 Q314 D702 Q315 D703 Q316 D706 Q317 D708 Q318 D709 Q319 D719 Q321...
  • Page 76 KP-51HW40/57HW40 RM-Y909 RM-Y909 [ DIGITAL REGI, DJED CPU, PJE DRIVE ] – AD Board – < Component Side > < Conductor Side > – 76 –...
  • Page 77 KP-51HW40/57HW40 RM-Y909 RM-Y909 [ A/D CONVERTER, DRC, MULTI IMAGA DRIVER, MID-U CON, D/A CONVERTER ] – B Board – < Component Side > – 77 –...
  • Page 78 KP-51HW40/57HW40 RM-Y909 RM-Y909 [ A/D CONVERTER, DRC, MULTI IMAGA DRIVER, MID-U CON, D/A CONVERTER ] – B Board – < Conductor Side > – 78 –...
  • Page 79 KP-51HW40/57HW40 RM-Y909 RM-Y909 [ CRT I/F BLUE ] – CB Board – < Component Side > < Conductor Side > – 79 –...
  • Page 80 KP-51HW40/57HW40 RM-Y909 RM-Y909 [ CRT I/F GREEN ] – CG Board – < Component Side > < Conductor Side > – 80 –...
  • Page 81 KP-51HW40/57HW40 RM-Y909 RM-Y909 [ CRT I/F RED ] – CR Board – < Component Side > < Conductor Side > – 81 –...
  • Page 82 KP-51HW40/57HW40 RM-Y909 RM-Y909 [ HV DRIVE, POWER SUPPLY, H DRIVE ] – D Board – D BOARD DIODE TRANSISTOR D8001 E-11 Q8001 E-12 D8002 E-11 Q8002 D8003 E-11 Q8003 D8004 F-11 Q8004 E-10 D8005 Q8005 D8006 Q8007 D8007 Q8008 D8008...
  • Page 83 KP-43HT20/53HS20/53HS30/61HS20/61HS30 [ RELAY DRIVE, STBY 5V, REGULATOR, POWER SUPPLY ] RM-Y908 RM-Y908 RM-Y908 RM-Y908 RM-Y908 – G Board – – 83 –...
  • Page 84 KP-43HT20/53HS20/53HS30/61HS20/61HS30 RM-Y908 RM-Y908 RM-Y908 RM-Y908 RM-Y908 [ POWER SWITCH ] [ FUNCTION KEK ] [ VIDEO 2 INPUT ] – H1 Board – – H2 Board – – H3 Board – – 84 –...
  • Page 85 KP-43HT20/53HS20/53HS30/61HS20/61HS30 RM-Y908 RM-Y908 RM-Y908 RM-Y908 RM-Y908 [ VIDEO, AUDIO INPUT/OUTPUT, AV SWITCH, AUDIO PROCESSOR ] – U Board – < Component Side > – 85 –...
  • Page 86 KP-43HT20/53HS20/53HS30/61HS20/61HS30 RM-Y908 RM-Y908 RM-Y908 RM-Y908 RM-Y908 [ VIDEO, AUDIO INPUT/OUTPUT, AV SWITCH, AUDIO PROCESSOR ] – U Board – < Conductor Side > – 86 –...
  • Page 87 KP-43HT20/53HS20/53HS30/61HS20/61HS30 RM-Y908 RM-Y908 RM-Y908 RM-Y908 RM-Y908 [ SENSOR ] [ SPEED MODULATION ] – S Board – < Conductor Side > < Component Side > – V Board – – 87 –...

  • Page 88: Waveforms

    KP-51HW40/57HW40 RM-Y909 RM-Y909 6-5. WAVEFORMS • A(1/9) BOARD WAVEFORMS 2.1Vp-p (H) • A(2/9) BOARD WAVEFORMS 2.1Vp-p (H) 2Vp-p (H) 3Vp-p (H) • A(3/9) BOARD WAVEFORMS 2.8Vp-p (20MHz) 3.6Vp-p (12MHz) 1.6Vp-p (H) 2.2p-p (H) 1.8Vp-p (H) 3.2Vp-p (H) 3.5Vp-p (V) 1.8Vp-p (H) 1.8Vp-p (H)
  • Page 89 KP-51HW40/57HW40 RM-Y909 RM-Y909 • AD(1/2) BOARD WAVEFORMS 12MHz 5.2Vp-p (H) 2.9Vp-p (V) 5Vp-p (V) • AD(2/2) BOARD WAVEFORMS 1.9Vp-p (V) 0.9Vp-p (V) 0.4Vp-p (V) 1.5Vp-p (V) 0.6Vp-p (V) 1.6Vp-p (V) • B(1/4) BOARD WAVEFORMS 4.5Vp-p (H) 4.5Vp-p (H) 4.2Vp-p (H) 3.1Vp-p (H)

  • Page 90: Ic Block Diagrams

    KP-51HW40/57HW40 RM-Y909 RM-Y909 6-6. IC BLOCK DIAGRAMS A BOARD : IC305, 307 SN74LV4053ANSR IN/OUT LOGIC LEVEL BINARY TO CONVERSION COMMON 1OF2 DECODERS WITH INHIBIT LOGIC LEVEL BINARY TO CONVERSION OUT/IN 1OF2 COMMON DECODERS WITH INHIBIT LOGIC LEVEL BINARY TO CONVERSION...
  • Page 91 KP-51HW40/57HW40 B BOARD : IC3305, 3404 TLC2932IPWR RM-Y909 RM-Y909 LOGIC LOGIC SELECT FIN-A FIN-B 1/2 DIVIDER R BIAS INHIBIT INHIBIT B BOARD : IC3413 SN74LV4053ANSR IN/OUT LOGIC LEVEL BINARY TO CONVERSION 1OF2 COMMON DECODERS WITH INHIBIT LOGIC LEVEL BINARY TO...
  • Page 92 KP-51HW40/57HW40 RM-Y909 RM-Y909 CR BOARD : IC7101 TDA6120Q n.c. MIRROR CASCODE n.c. 0.7 pF MIRROR out 1 x out 4 x CURRENT INPUT VIN - CASCODE 5 mA RC - RC + VIN + CG BOARD : IC7201 TDA6120Q n.c.
  • Page 93 KP-51HW40/57HW40 RM-Y909 RM-Y909 U BOARD : IC2004 CXA2069Q VOUT1 YIN1 YOUT1 TRAP1 COUT1 CIN1 V/YOUT2 TRAP2 COUT2 VOUT3 YOUT3 COUT3 VGND BIAS BIAS AGND LOUT1 ROUT1 LOUT2 ROUT2 LOUT3 ROUT3 DC OUT Logic S2-1 S2-2 S2-3 S2-4 MUTE – 93 –...

  • Page 94: Semiconductors

    KP-51HW40/57HW40 RM-Y909 RM-Y909 6-7. SEMICONDUCTORS BA05T TDA7265 CXA1726AM 2SC2688-LK D4SBS4-F NJM2395AF05 1SS83TD NJM2180M D6SB60L PQ09RF21 LETTER SIDE 21DP05 MARKING SIDE VIEW D1NL40-TR2 D1NS4 D2L20U – 11pin ZIP EL1Z TOP VIEW GP08DPKG23 30pin SOP TEA6422DT RD10ES-B2 – RD15ES-B2 CXA2069Q NJM2903M RD18ES-B2...

  • Page 95: Exploded Views

    KP-51HW40/57HW40 RM-Y909 RM-Y909 SECTION 7 EXPLODED VIEWS REF. NO. PART NO. DESCRIPTION REMARK ––––––––– REF. NO. PART NO. DESCRIPTION REMARK NOTE: –––––––– ––––––––– ––––––––––––– –––––––– ––––––––– ––––––––––––– ––––––––– • Items with no part number and no • Items marked "...

  • Page 96: Chassis

    KP-51HW40/57HW40 RM-Y909 RM-Y909 Les composants identifies par The components identified by une trame et une marque shading and mark are criti- sont critiques pour la securite. cal for safety. Ne les remplacer que par une Replace only with part number piece portant le numero specifie.

  • Page 97: Picture Tube

    KP-51HW40/57HW40 RM-Y909 RM-Y909 7-3. PICTURE TUBE : +BVTP 3X12 7-685-648-79 : +BVTP 4X12 7-685-661-14 NOTE: For S/N's 97000001-98XXXXXX, use CRT P/N's listed below. For S/N's 90000001-90XXXXXX, use CRT P/N's referred to in Supplement-1 REF. NO. PART NO. DESCRIPTION REMARK REF. NO. PART NO.

  • Page 98: Electrical Parts List

    KP-51HW40/57HW40 RM-Y909 RM-Y909 SECTION 8 ELECTRICAL PARTS LIST • The components identified by in this manual • CAPACITORS PF : µµ F have been carefully factory-selected for each set The components identified by shading and in order to satisfy regulations regarding X-ray mark are critial for safety.
  • Page 99 KP-51HW40/57HW40 Les composants identifies par RM-Y909 RM-Y909 The components identified by une trame et une marque shading and mark are criti- sont critiques pour la securite. cal for safety. Ne les remplacer que par une Replace only with part number piece portant le numero specifie.
  • Page 100 KP-51HW40/57HW40 RM-Y909 RM-Y909 CB V REF. NO. PART NO. DESCRIPTION REMARK ––––––––– REF. NO. PART NO. DESCRIPTION REMARK –––––––– ––––––––– ––––––––––––– –––––––– ––––––––– ––––––––––––– ––––––––– < DIODE > * A-1342-598-A V BOARD, COMPLETE ********************* D7301 8-719-988-61 1SS355TE-17 D7302 8-719-988-61 1SS355TE-17...
  • Page 101 KP-51HW40/57HW40 RM-Y909 RM-Y909 REF. NO. PART NO. DESCRIPTION REMARK ––––––––– REF. NO. PART NO. DESCRIPTION REMARK –––––––– ––––––––– ––––––––––––– –––––––– ––––––––– ––––––––––––– ––––––––– R9011 1-216-864-11 SHORT C3318 1-164-156-11 CERAMIC CHIP 0.1UF R9012 1-216-823-11 RES-CHIP 1.5K 1/16W C3319 1-164-156-11 CERAMIC CHIP 0.1UF...
  • Page 102 KP-51HW40/57HW40 RM-Y909 RM-Y909 REF. NO. PART NO. DESCRIPTION REMARK ––––––––– REF. NO. PART NO. DESCRIPTION REMARK –––––––– ––––––––– ––––––––––––– –––––––– ––––––––– ––––––––––––– ––––––––– C3377 1-162-970-11 CERAMIC CHIP 0.01UF 10% 25V C3455 1-124-779-00 ELECT CHIP 10UF 20% 16V C3456 1-164-156-11 CERAMIC CHIP 0.1UF...
  • Page 103 KP-51HW40/57HW40 RM-Y909 RM-Y909 REF. NO. PART NO. DESCRIPTION REMARK ––––––––– REF. NO. PART NO. DESCRIPTION REMARK –––––––– ––––––––– ––––––––––––– –––––––– ––––––––– ––––––––––––– ––––––––– < FILTER > L3409 1-469-555-21 INDUCTOR 10UH L3410 1-412-058-11 INDUCTOR 10UH FL3003 1-781-924-11 FILTER, LOW PASS (SMD)
  • Page 104 KP-51HW40/57HW40 RM-Y909 RM-Y909 REF. NO. PART NO. DESCRIPTION REMARK ––––––––– REF. NO. PART NO. DESCRIPTION REMARK –––––––– ––––––––– ––––––––––––– –––––––– ––––––––– ––––––––––––– ––––––––– R3091 1-216-825-11 RES-CHIP 2.2K 1/16W R3340 1-216-855-11 RES-CHIP 680K 1/16W R3092 1-216-825-11 RES-CHIP 2.2K 1/16W R3341 1-216-813-11 RES-CHIP...
  • Page 105 KP-51HW40/57HW40 RM-Y909 RM-Y909 REF. NO. PART NO. DESCRIPTION REMARK ––––––––– REF. NO. PART NO. DESCRIPTION REMARK –––––––– ––––––––– ––––––––––––– –––––––– ––––––––– ––––––––––––– ––––––––– R3465 1-216-821-11 RES-CHIP 1/16W R3824 1-216-826-11 RES-CHIP 2.7K 1/16W R3825 1-216-826-11 RES-CHIP 2.7K 1/16W R3467 1-216-821-11 RES-CHIP...
  • Page 106 KP-51HW40/57HW40 RM-Y909 RM-Y909 REF. NO. PART NO. DESCRIPTION REMARK ––––––––– REF. NO. PART NO. DESCRIPTION REMARK –––––––– ––––––––– ––––––––––––– –––––––– ––––––––– ––––––––––––– ––––––––– RB3306 1-234-525-21 RES, CHIP NETWORK 56 C2029 1-126-964-11 ELECT 10UF 20% 50V RB3307 1-234-525-21 RES, CHIP NETWORK 56...
  • Page 107 KP-51HW40/57HW40 RM-Y909 RM-Y909 REF. NO. PART NO. DESCRIPTION REMARK ––––––––– REF. NO. PART NO. DESCRIPTION REMARK –––––––– ––––––––– ––––––––––––– –––––––– ––––––––– ––––––––––––– ––––––––– C2315 1-137-372-11 MYLAR 0.022UF < DIODE > C2316 1-107-826-11 CERAMIC CHIP 0.1UF 10% 16V C2317 1-107-826-11 CERAMIC CHIP 0.1UF...
  • Page 108 KP-51HW40/57HW40 RM-Y909 RM-Y909 REF. NO. PART NO. DESCRIPTION REMARK ––––––––– REF. NO. PART NO. DESCRIPTION REMARK –––––––– ––––––––– ––––––––––––– –––––––– ––––––––– ––––––––––––– ––––––––– IC2302 8-759-578-49 NJM2370U10-TE2 R2014 1-216-853-11 RES-CHIP 470K 1/16W IC2305 8-759-686-15 NJM2180M R2015 1-216-853-11 RES-CHIP 470K 1/16W < JACK >...
  • Page 109 KP-51HW40/57HW40 RM-Y909 RM-Y909 REF. NO. PART NO. DESCRIPTION REMARK ––––––––– REF. NO. PART NO. DESCRIPTION REMARK –––––––– ––––––––– ––––––––––––– –––––––– ––––––––– ––––––––––––– ––––––––– R2072 1-216-829-11 RES-CHIP 4.7K 1/16W R2164 1-218-710-11 METAL CHIP 5.6K 0.5% 1/16W R2073 1-216-809-11 RES-CHIP 1/16W R2166...
  • Page 110 KP-51HW40/57HW40 RM-Y909 RM-Y909 REF. NO. PART NO. DESCRIPTION REMARK ––––––––– REF. NO. PART NO. DESCRIPTION REMARK –––––––– ––––––––– ––––––––––––– –––––––– ––––––––– ––––––––––––– ––––––––– R2343 1-216-864-11 SHORT C1631 1-126-933-11 ELECT 100UF 20% 16V C1632 1-164-156-11 CERAMIC CHIP 0.1UF R2353 1-216-823-11 RES-CHIP 1.5K...
  • Page 111 KP-51HW40/57HW40 RM-Y909 RM-Y909 REF. NO. PART NO. DESCRIPTION REMARK ––––––––– REF. NO. PART NO. DESCRIPTION REMARK –––––––– ––––––––– ––––––––––––– –––––––– ––––––––– ––––––––––––– ––––––––– C1699 1-164-156-11 CERAMIC CHIP 0.1UF < IC > C1700 1-164-156-11 CERAMIC CHIP 0.1UF IC1601 8-759-683-55 IC CM0017AF...
  • Page 112 KP-51HW40/57HW40 RM-Y909 RM-Y909 REF. NO. PART NO. DESCRIPTION REMARK ––––––––– REF. NO. PART NO. DESCRIPTION REMARK –––––––– ––––––––– ––––––––––––– –––––––– ––––––––– ––––––––––––– ––––––––– R1647 1-216-833-11 RES-CHIP 1/16W R1713 1-216-833-11 RES-CHIP 1/16W R1648 1-216-809-11 RES-CHIP 1/16W R1649 1-216-809-11 RES-CHIP 1/16W R1714...
  • Page 113 KP-51HW40/57HW40 RM-Y909 RM-Y909 REF. NO. PART NO. DESCRIPTION REMARK ––––––––– REF. NO. PART NO. DESCRIPTION REMARK –––––––– ––––––––– ––––––––––––– –––––––– ––––––––– ––––––––––––– ––––––––– 1-126-934-11 ELECT 220UF 20% 10V C106 1-126-933-11 ELECT 100UF 20% 16V 1-162-974-11 CERAMIC CHIP 0.01UF C108 1-162-917-11 CERAMIC CHIP...
  • Page 114 KP-51HW40/57HW40 RM-Y909 RM-Y909 REF. NO. PART NO. DESCRIPTION REMARK ––––––––– REF. NO. PART NO. DESCRIPTION REMARK –––––––– ––––––––– ––––––––––––– –––––––– ––––––––– ––––––––––––– ––––––––– C326 1-164-315-11 CERAMIC CHIP 470PF C383 1-125-891-11 CERAMIC CHIP 0.47UF 10% 10V C327 1-162-917-11 CERAMIC CHIP 15PF...
  • Page 115 KP-51HW40/57HW40 RM-Y909 RM-Y909 REF. NO. PART NO. DESCRIPTION REMARK ––––––––– REF. NO. PART NO. DESCRIPTION REMARK –––––––– ––––––––– ––––––––––––– –––––––– ––––––––– ––––––––––––– ––––––––– C463 1-107-826-11 CERAMIC CHIP 0.1UF 10% 16V C739 1-126-963-11 ELECT 4.7UF 20% 50V C464 1-107-826-11 CERAMIC CHIP 0.1UF...
  • Page 116 KP-51HW40/57HW40 Les composants identifies par RM-Y909 RM-Y909 The components identified by une trame et une marque shading and mark are criti- sont critiques pour la securite. cal for safety. Ne les remplacer que par une Replace only with part number piece portant le numero specifie.
  • Page 117 KP-51HW40/57HW40 RM-Y909 RM-Y909 REF. NO. PART NO. DESCRIPTION REMARK ––––––––– REF. NO. PART NO. DESCRIPTION REMARK –––––––– ––––––––– ––––––––––––– –––––––– ––––––––– ––––––––––––– ––––––––– < COIL > 8-729-422-27 2SD601A-Q 8-729-026-49 2SA1037AK-T146-R 1-414-181-11 INDUCTOR 4.7UH 8-729-026-49 2SA1037AK-T146-R 1-469-555-21 INDUCTOR 10UH 8-729-422-27 2SD601A-Q...
  • Page 118 KP-51HW40/57HW40 RM-Y909 RM-Y909 REF. NO. PART NO. DESCRIPTION REMARK ––––––––– REF. NO. PART NO. DESCRIPTION REMARK –––––––– ––––––––– ––––––––––––– –––––––– ––––––––– ––––––––––––– ––––––––– Q337 8-729-422-27 2SD601A-Q < RESISTOR > Q338 8-729-422-27 2SD601A-Q Q339 8-729-422-27 2SD601A-Q 1-216-464-11 METAL OXIDE 1-216-813-11 RES-CHIP...
  • Page 119 KP-51HW40/57HW40 RM-Y909 RM-Y909 REF. NO. PART NO. DESCRIPTION REMARK ––––––––– REF. NO. PART NO. DESCRIPTION REMARK –––––––– ––––––––– ––––––––––––– –––––––– ––––––––– ––––––––––––– ––––––––– 1-216-833-11 RES-CHIP 1/16W R130 1-216-821-11 RES-CHIP 1/16W 1-216-849-11 RES-CHIP 220K 1/16W R131 1-216-837-11 RES-CHIP 1/16W 1-216-841-11 RES-CHIP...
  • Page 120 KP-51HW40/57HW40 RM-Y909 RM-Y909 REF. NO. PART NO. DESCRIPTION REMARK ––––––––– REF. NO. PART NO. DESCRIPTION REMARK –––––––– ––––––––– ––––––––––––– –––––––– ––––––––– ––––––––––––– ––––––––– R338 1-216-823-11 RES-CHIP 1.5K 1/16W R394 1-216-809-11 RES-CHIP 1/16W R395 1-216-821-11 RES-CHIP 1/16W R339 1-216-809-11 RES-CHIP 1/16W...
  • Page 121 KP-51HW40/57HW40 RM-Y909 RM-Y909 REF. NO. PART NO. DESCRIPTION REMARK ––––––––– REF. NO. PART NO. DESCRIPTION REMARK –––––––– ––––––––– ––––––––––––– –––––––– ––––––––– ––––––––––––– ––––––––– R453 1-216-841-11 RES-CHIP 1/16W R550 1-216-863-11 RES-CHIP 3.3M 1/16W R454 1-216-837-11 RES-CHIP 1/16W R455 1-216-837-11 RES-CHIP 1/16W...
  • Page 122 KP-51HW40/57HW40 RM-Y909 RM-Y909 REF. NO. PART NO. DESCRIPTION REMARK ––––––––– REF. NO. PART NO. DESCRIPTION REMARK –––––––– ––––––––– ––––––––––––– –––––––– ––––––––– ––––––––––––– ––––––––– R710 1-216-813-11 RES-CHIP 1/16W R778 1-216-809-11 RES-CHIP 1/16W R779 1-216-809-11 RES-CHIP 1/16W R711 1-216-833-11 RES-CHIP 1/16W R712...
  • Page 123 KP-51HW40/57HW40 RM-Y909 RM-Y909 REF. NO. PART NO. DESCRIPTION REMARK ––––––––– REF. NO. PART NO. DESCRIPTION REMARK –––––––– ––––––––– ––––––––––––– –––––––– ––––––––– ––––––––––––– ––––––––– R857 1-216-838-11 RES-CHIP 1/16W < VIBRATOR > R858 1-216-829-11 RES-CHIP 4.7K 1/16W 1-577-110-11 VIBRATOR, CRYSTAL R859 1-218-708-11 METAL CHIP 4.7K...
  • Page 124 KP-51HW40/57HW40 RM-Y909 RM-Y909 REF. NO. PART NO. DESCRIPTION REMARK ––––––––– REF. NO. PART NO. DESCRIPTION REMARK –––––––– ––––––––– ––––––––––––– –––––––– ––––––––– ––––––––––––– ––––––––– C8052 1-126-965-11 ELECT 22UF 20% 50V C8110 1-126-960-11 ELECT 20% 50V C8053 1-162-974-11 CERAMIC CHIP 0.01UF C8054 1-162-974-11 CERAMIC CHIP 0.01UF...
  • Page 125 KP-51HW40/57HW40 Les composants identifies par RM-Y909 RM-Y909 The components identified by une trame et une marque shading and mark are criti- sont critiques pour la securite. cal for safety. Ne les remplacer que par une Replace only with part number piece portant le numero specifie.
  • Page 126 KP-51HW40/57HW40 Les composants identifies par RM-Y909 RM-Y909 The components identified by une trame et une marque shading and mark are criti- sont critiques pour la securite. cal for safety. Ne les remplacer que par une Replace only with part number piece portant le numero specifie.
  • Page 127 KP-51HW40/57HW40 RM-Y909 RM-Y909 REF. NO. PART NO. DESCRIPTION REMARK ––––––––– REF. NO. PART NO. DESCRIPTION REMARK –––––––– ––––––––– ––––––––––––– –––––––– ––––––––– ––––––––––––– ––––––––– R8080 1-216-353-00 METAL OXIDE R8139 1-216-827-11 RES-CHIP 3.3K 1/16W R8081 1-214-808-11 METAL 1/2W R8140 1-216-833-11 RES-CHIP 1/16W...
  • Page 128 KP-51HW40/57HW40 Les composants identifies par RM-Y909 RM-Y909 The components identified by une trame et une marque • The components identified by in this manual have shading and mark are criti- sont critiques pour la securite. cal for safety. been carefully factory-selected for each set in order to...
  • Page 129 KP-51HW40/57HW40 Les composants identifies par RM-Y909 RM-Y909 The components identified by une trame et une marque shading and mark are criti- sont critiques pour la securite. cal for safety. Ne les remplacer que par une Replace only with part number piece portant le numero specifie.
  • Page 130 KP-51HW40/57HW40 Les composants identifies par RM-Y909 RM-Y909 The components identified by une trame et une marque shading and mark are criti- sont critiques pour la securite. cal for safety. Ne les remplacer que par une Replace only with part number piece portant le numero specifie.
  • Page 131 KP-51HW40/57HW40 Les composants identifies par RM-Y909 RM-Y909 The components identified by une trame et une marque shading and mark are criti- sont critiques pour la securite. cal for safety. Ne les remplacer que par une Replace only with part number piece portant le numero specifie.
  • Page 132 KP-51HW40/57HW40 RM-Y909 RM-Y909 REF. NO. PART NO. DESCRIPTION REMARK –––––––– ––––––––– ––––––––––––– ––––––––– ACCESSORIES & PACKING MATERIALS ************************************** * 4-041-426-01 BAG, PROTECTION (51HW40) * 4-042-463-01 SHEET, PROTECTION * 4-076-420-01 BAG, PROTECTION (57HW40) * 4-081-682-01 TRAY (51HW40) * 4-081-683-01 INDIVIDUAL CARTON (51HW40)
  • Page 133 WARNING Note on Caption Vision This television receiver provides display of television To prevent fire or shock hazard, do not closed captioning in accordance with §15.119 of the FCC expose the projection TV to rain or rules. moisture. Note on convergence adjustment Before you use your projection TV, make sure to adjust CAUTION convergence.
  • Page 134 The model and serial numbers are located at the rear of the Never pull on the cord. projection TV, below the Sony logo, on the sticker, and For details concerning safety precautions, see also on the TV box (white label). Record these numbers in “Important Safeguards”...

  • Page 135: Important Safeguards

    Important Safeguards Overloading Do not overload wall outlets, extension For your protection, please read these instructions cords or convenience receptacles completely, and keep this manual for future reference. beyond their capacity, since this can result in fire or electric shock. Carefully observe and comply with all warnings, cautions and instructions placed on the set or described in the Always turn the set off when it is not...
  • Page 136 Installation Power-Cord Protection Do not allow anything to rest on or roll Water and Moisture over the power cord, and do not place the Do not use power-line operated sets set where the power cord is subject to near water — for example, near a wear or abuse.
  • Page 137 Lightning Safety Check For added protection for this television receiver during a Upon completion of any service or repairs lightning storm, or when it is left unattended and unused to the set, ask the service technician to for long periods of time, unplug it from the wall outlet perform routine safety checks (as specified and disconnect the antenna.
  • Page 138 Contents Introducing the Sony Projection TV Using the Menus Presenting the Sony Projection TV......8 Overview..............48 Using this manual ............9 Using the Video Menu..........49 Using the Audio Menu..........51 Using the Channel Menu ........53 Installing and Connecting the Using the Wide Menu ...........55 Projection TV Using the Timer Menu..........57...

  • Page 139: Introducing The Sony Projection Tv

    Introducing the Sony Projection TV Presenting the Sony Projection TV Thank you for purchasing the Sony Projection TV. This manual is for models KP-51HW40 and KP-57HW40. Model KP-51HW40 is used for illustration purposes. Features Some of the features that you will enjoy with your new projection TV include: ™...

  • Page 140: Using This Manual

    Introducing the Sony Projection TV ❑ Wide Screen Mode: Allows you to watch 4:3 normal broadcasts in wide screen mode (16:9 aspect ratio). ❑ Auto Wide: Allows you to select the wide screen mode automatically. ™ ❑ Flash Focus : Allows you to adjust convergence automatically.

  • Page 141: Installing And Connecting The Projection Tv

    Installing and Connecting the Projection TV Contents The box contains your new projection TV, a remote control and two AA batteries. No peripheral cables are included. If you intend to add additional equipment to your projection TV, please check the hookup instructions for your desired setup before you begin.

  • Page 142: Installing The Projection Tv

    Installing and Connecting the Projection TV Installing the Projection TV Recommended viewing area (Horizontal) ˚ ˚ Recommended viewing area (Vertical) ˚ ˚...

  • Page 143: Connector Types

    Some DVD Players are equipped with the following three video connectors: Y - Green or B–Y) - Blue or R–Y) - Red CONTROL S cable CONTROL S connections are exclusive to Sony products and allow greater control of all Sony equipment. Push into connection.

  • Page 144: Projection Tv Controls And Connectors

    Installing and Connecting the Projection TV Projection TV Controls and Connectors Front Panel Menu The front panel menu controls allow access to the on-screen menus without Controls the use of a remote control. Pressing brings up the on-screen menus. MENU The arrow buttons move the on-screen cursor in the menus and by pressing the Select button ( ) selects the menu item.
  • Page 145 Installing and Connecting the Projection TV Projection TV Rear and Front Panel Rear of projection TV Connectors Front of projection TV...
  • Page 146 (VAR/FIX) video component. L (MONO)/R 9 CONTROL S To control other Sony equipment with the projection TV's IN/OUT remote control, connect the CONTROL S IN jack of the equipment to the CONTROL S OUT jack on the projection TV with the CONTROL S cable.

  • Page 147: Basic Connections (Connecting Cable Tv Or Antenna)

    Installing and Connecting the Projection TV Basic Connections (Connecting Cable TV or Antenna) Connecting Directly The connection you choose depends on the cable found in your home. Newer to Cable or an homes are equipped with standard coaxial cable (see );...
  • Page 148 Installing and Connecting the Projection TV Cable Box Cable Box and Cable This is the preferred basic cable TV hookup to use if: Connections ❑ Your cable TV company scrambles some channels, but not all of them (pay channels vs. regular cable channels) and you need to use a cable box, and ❑...
  • Page 149 Also, set Cable to ON in the Channel menu (see page 53). ✍ Setting the Channel Your Sony remote control can be programmed to operate your cable box Fix feature in the Channel (see “Programming the Remote Control” on page 68).

  • Page 150: Connecting A Vcr And Cable

    Installing and Connecting the Projection TV Connecting a VCR and Cable Use this hookup if: ❑ You have cable TV that does not require a cable box. Disconnect all power sources before making any connections. Connect the cable TV cable to the VCR’s IN jack. Using a coaxial cable, connect the VCR’s OUT jack to the projection TV’s VHF/UHF jack.

  • Page 151: Connecting A Vcr And Cable Box

    With this setup you can: ❑ Use the projection TV remote control to change channels on your cable box when the signal is scrambled. To program your Sony remote control to operate your cable box, See “Programming the Remote Control” on page 68.
  • Page 152 Installing and Connecting the Projection TV YC-15V/30V (not supplied) Coaxial cable VMC-810S/820S VIDEO (yellow) (not supplied) AUDIO-L (white) Cable box S VIDEO AUDIO-R (red) Coaxial cable Rear of projection TV ✍ If your VCR is not equipped with S VIDEO, use a VIDEO cable (yellow) instead of the S VIDEO cable.

  • Page 153: Connecting Two Vcrs For Tape Editing

    Installing and Connecting the Projection TV Connecting Two VCRs for Tape Editing If you connect two VCRs, you can record from one VCR to the other while using your projection TV to monitor what is being recorded. Disconnect all power sources before making any connections. Using AUDIO and VIDEO cables, connect the playback VCR’s Audio and Video OUT jacks to the recording VCR’s Audio and Video IN jacks.

  • Page 154: Connecting A Satellite Receiver

    Installing and Connecting the Projection TV Connecting a Satellite Receiver Disconnect all power sources before making any connections. Connect the satellite antenna cable to the satellite receiver’s SATELLITE IN jack. Using AUDIO and S VIDEO cables, connect the satellite receiver’s AUDIO and S VIDEO OUT jacks to the projection TV’s AUDIO and S VIDEO IN jacks.

  • Page 155: Connecting A Satellite Receiver With A Vcr

    Installing and Connecting the Projection TV Connecting a Satellite Receiver with a VCR Disconnect all power sources before making any connections. Connect the satellite antenna cable to the satellite receiver’s SATELLITE IN jack. Connect the CATV cable to the VCR’s VHF/UHF IN jack. Using a coaxial cable, connect the VCR’s OUT jack to the projection TV’s VHF/UHF jack.

  • Page 156: Connecting An Audio Receiver

    Installing and Connecting the Projection TV Connecting an Audio Receiver Disconnect all power sources before making any connections. Using audio cables, connect the projection TV’s AUDIO OUT (VAR/FIX) jacks to the audio receiver’s audio LINE IN jacks. Rear of projection TV AUDIO-R AUDIO-L (red)

  • Page 157: Connecting A Dvd Player With Component Video Connectors

    Installing and Connecting the Projection TV Connecting a DVD Player with Component Video Connectors This is the preferred hookup to use if: ❑ Your DVD player has component (Y, B-Y, R-Y) jacks. Disconnect all power sources before making any connections. Using three separate component video cables, connect the DVD player’s Y, B-Y and R-Y jacks to the Y, P and P...

  • Page 158: Connecting A Dvd Player With A/V Connectors

    Installing and Connecting the Projection TV Connecting a DVD Player with A/V Connectors Use this hookup if: ❑ Your DVD player does not have component (Y, P ) jacks. ✍ If your DVD player has video component output connectors: for best picture quality use the connection described on page 26.

  • Page 159: Connecting A Digital Tv Receiver

    Installing and Connecting the Projection TV Connecting a Digital TV Receiver Disconnect all power sources before making any connections. Be sure to read the Using three separate component video cables, connect the Digital TV Set-top box manual. Set-top box’s Y, P and P jacks to the projection TV.

  • Page 160: Connecting A Camcorder

    Installing and Connecting the Projection TV Connecting a Camcorder For easy connection of the camcorder, the projection TV has front Audio and Video inputs (shown below). However, if you prefer, you can also connect the camcorder to the projection TV’s rear Audio and Video IN jacks. Using AUDIO and S VIDEO cables, connect the camcorder’s Audio and S VIDEO OUT jacks to the projection TV’s AUDIO and S VIDEO IN jacks.

  • Page 161: Connecting An Av Receiver

    Installing and Connecting the Projection TV Connecting an AV Receiver For greater control of all audio and video equipment, connect an AV receiver. ✍ Change “Video Label” for the VIDEO 1 input to “Receiver” (see page 59). Disconnect all power sources before making any connections. Connect the coaxial cable from the incoming cable connection or antenna to IN on the VCR.

  • Page 162: Using The Control S Feature

    Using the CONTROL S Feature CONTROL S allows you to control your projection TV system and other Sony equipment with one remote control. In addition to allowing you to control multiple devices with one remote control, the CONTROL S feature...

  • Page 163: Setting Up The Projection Tv Automatically

    Installing and Connecting the Projection TV Setting Up the Projection TV Automatically After you finish connecting your projection TV, you can run Auto Setup to set up your channels. The Auto Setup screen appears when you turn your projection TV on for the first time after installing it. If you do not want to set up the channels at this time, you can do it later by using the Auto Program feature in the Channel menu (see page 54).

  • Page 164: Adjusting The Convergence Automatically - Flash Focus

    Installing and Connecting the Projection TV Adjusting the Convergence Automatically – FLASH FOCUS™ – The projection tube image appears on the screen in three colors (red, green and blue). If they do not converge, the color is poor and the picture blurs. Before you use your projection TV, be sure to adjust the convergence.

  • Page 165: Using The Features

    Using the Features Using the Remote Control The following table describes the buttons on the remote control that are for more advanced functions. Button Descriptions Outside Panel Button Description 1 MUTING Press to mute the sound. Press again or press VOL + to restore the sound.
  • Page 166 Using the Features Button Description qd POWER Turn on and off the projection TV and other audio/video buttons equipment you have programmed into the remote control. (GREEN) For instructions, see “Programming the Remote Control” on page 68. qf FUNCTION Select the equipment (TV, SAT/CABLE) that you want to buttons operate.
  • Page 167 Stereo, Auto SAP, and Mono. 8 CODE SET Used for programming the remote control to operate non- Sony video equipment. For details, see “Programming the Remote Control” on page 68. 9 POWER Press to turn on the DVD/VCR player you have programmed into the remote control.

  • Page 168: Watching The Tv

    Using the Features Watching the TV Many TV features can be accessed directly through the remote control. The following will explain the function of some of the buttons found on your remote control. Buttons for 1 TV (FUNCTION) Activates the remote control for use with the projection TV. Projection TV Operations 2 ANT—...
  • Page 169 Using the Features qa DISPLAY Press to display the channel number, current time and channel label (if set). To turn the display off, press again. DISPLAY qs TV/VIDEO Press repeatedly to scroll through available video inputs: TV, VIDEO 1, VIDEO 2, VIDEO 3, VIDEO 4, VIDEO 5 and VIDEO 6. If you select as a in the Setup menu, your projection TV...

  • Page 170: Watching The Digital Tv

    Using the Features Watching the Digital TV When you have connected the DTV receiver, you can enjoy digital TV programs. This projection TV is capable of receiving the 1080i, 720p, 480p and 480i digital TV formats. ✍ This projection TV is not capable of displaying a native 720p format signal.

  • Page 171: Using Favorite Channels

    Using the Features Using Favorite Channels The Favorite Channel feature lets you select programs from a list of favorite channels that you preset. To display a list of your favorite channels: ✍ Your Favorite Channel options can be set automatically or manually. The factory setting for Favorite Channel is Auto.

  • Page 172: Using Twin View

    Using the Features Using Twin View™ Twin View enables you to watch two programs at the same time. You can also change the size of both the left and right pictures. Activating Twin To display twin pictures Pictures 1 1 1 1 Make sure your projection TV is tuned to a working channel.
  • Page 173 Using the Features ✍ When you adjust the twin screen sizes, the projection TV memorizes the change. The next time you use the Twin View feature the memorized sizes appear. ✍ Hookups that affect your ability to use Twin View: - If you are viewing all channels through the cable box, the Twin View feature will not work.
  • Page 174 Using the Features Changing the The zoom feature lets you change the size of the left and right pictures. Picture Size To enlarge the left To enlarge the picture (reduce right picture the right) (reduce the left) 1 1 1 1 1 1 1 1 Move the Move the...

  • Page 175: Using The Freeze Function

    Using the Features Using the Freeze Function button allows you to temporarily capture a program’s picture. FREEZE You can use this feature to write down information such as phone numbers, recipes, etc. To use the Freeze function 1 1 1 1 When the program information you want to capture is displayed, press FREEZE 2 2 2 2...

  • Page 176: Using Scrolling Channel Index

    Using the Features Using Scrolling Channel Index Scrolling Channel Index allows you to view and select from all receivable channels scrolling on the screen without leaving the current channel. ✍ Scrolling Channel Index will not function when parental Lock is activated. To use the Scrolling Channel Index function 1 1 1 1 Press...
  • Page 177 Using the Features 4 4 4 4 Press The selected channel will be enlarged for normal viewing. To cancel Scrolling Channel Index Press again to resume normal viewing.

  • Page 178: Using Wide Screen Mode

    Using the Features Using Wide Screen Mode Wide Screen Mode lets you watch 4:3 normal broadcasts in several Wide Screen modes (16:9 aspect ratio). ❑ Press WIDE MODE repeatedly to toggle through the following Wide You can also access the Mode settings.

  • Page 179: Using The Menus

    Using the Menus Overview Opening and choosing a menu: 1 1 1 1 Press to display the menu screen. MENU 2 2 2 2 Move the joystick to the desired menu icon and press to select it. 3 3 3 3 Use the joystick to scroll through the features.

  • Page 180: Using The Video Menu

    Using the Menus Using the Video Menu To select the Video Menu 1 1 1 1 Press MENU 2 2 2 2 Move the joystick to the Video icon and press 3 3 3 3 Use the joystick to scroll through the features.
  • Page 181 Using the Menus Option Description DRC Mode Creates a high-resolution picture with 4x density, for high quality Digital sources (i.e., DVD player, Satellite receiver). Reality Interlaced Recommended for moving pictures. Creation Progressive Recommended for still images and text. CineMotion Recommended for 24 frame-per-second films.

  • Page 182: Using The Audio Menu

    Using the Menus Using the Audio Menu To select the Audio Menu 1 1 1 1 Press MENU 2 2 2 2 Move the joystick to the Audio icon and press 3 3 3 3 Use the joystick to scroll through the options.
  • Page 183 Using the Menus Option Description Speaker Select to turn on the projection TV speakers. Select to turn off the projection TV speakers and listen to the projection TV's sound only through your external audio system speakers. Audio Out Variable The projection TV’s speakers are turned off, but Easy control the volume output from your audio system can still of volume...

  • Page 184: Using The Channel Menu

    Using the Menus Using the Channel Menu To select the Channel Menu 1 1 1 1 Press MENU 2 2 2 2 Move the joystick to the Channel icon and press 3 3 3 3 Use the joystick to scroll through the features.
  • Page 185 Using the Menus Option Description Channel Fix “Fix” your projection TV’s channel setting to 3 or 4 and use the cable box, VCR or satellite Useful when you receiver to change channels. Select one of these have a cable box settings if you have connected the device to the or satellite VHF/UHF jack.

  • Page 186: Using The Wide Menu

    Using the Menus Using the Wide Menu To select the Wide menu 1 1 1 1 Press MENU 2 2 2 2 Use the joystick to move to the Wide icon and press 3 3 3 3 Move the joystick to scroll through the features.
  • Page 187 Using the Menus Option Description Vertical Center Allows you to move the position of the picture up and down in If 4:3 Default is set to the window. (Available only in Wide Zoom and Zoom modes.) anything but Off, the Wide Move the joystick up or down to choose a position and press Mode setting changes only for the current...

  • Page 188: Using The Timer Menu

    Using the Menus Using the Timer Menu To select the Timer menu 1 1 1 1 Press MENU 2 2 2 2 Move the joystick to the Timer icon and press To set the Current Time 1 1 1 1 Use the joystick to select “Current Time”, then press 2 2 2 2...

  • Page 189: Using The Setup Menu

    Using the Menus Using the Setup Menu To select the Setup Menu 1 1 1 1 Press MENU 2 2 2 2 Move the joystick to the Setup icon and press 3 3 3 3 Use the joystick to scroll through the features.
  • Page 190 Using the Menus Option Description Video Label Allows you to label the audio/video components you connected to the projection TV so you can identify them when using TV/ VIDEO. When in the Setup menu’s Video Label feature, use the joystick to highlight an input to label, then press select it.
  • Page 191 Using the Menus Using the Parent The Parent menu allows you to set up the TV to block programs according to Menu their content and rating levels. These ratings are assigned by a federal rating board. Not all programs are rated.
  • Page 192 Using the Menus 6 6 6 6 Make sure that “Country” is selected, and press 7 7 7 7 Move the joystick up or down to select U.S.A. or Canada according to the country you reside in, and press 8 8 8 8 Move the joystick down to select “Parental Lock”, and press 9 9 9 9 Move the joystick up or down to select a desired rating, and press...
  • Page 193 Using the Menus The Parent menu includes the following options. If you are not familiar Option Description with the Parental Parental Lock Parental lock is off. No programs are blocked Guideline rating system, from viewing. Turn ratings on/ you should select Child, Child Maximum ratings permitted are: off and select a...
  • Page 194 Using the Menus Using Custom If you want to select the ratings to be blocked from Custom, follow the procedure below. Rating Options 1 1 1 1 Perform the steps 1 to 8 in “To select the rating” on page 60 to display the Parental Lock options.
  • Page 195 Using the Menus 5 5 5 5 Move the joystick left, then down, to select “TV Rating” or “Program,” and press 6 6 6 6 The “TV Rating” setting menu appears. 7 7 7 7 Move the joystick up or down to select the rating to be blocked, and press indicator automatically appears beside the selected rating and all “higher”...
  • Page 196 Using the Menus 8 8 8 8 Move the joystick left or right to select the extender to be viewed, and press “-” appears beside the selected extender, indicating that the programs that match the extender can be viewed. If you press again, is displayed to show that the programs that match the extender will be blocked again.
  • Page 197 Using the Menus US custom rating options If you selected U.S.A. as the country of residence on page 60, the Custom Rating Menu includes the following options. (If you selected Canada, see page 67.) Option Description Movie Rating All children and General Audience. To ensure maximum Parental Guidance suggested.
  • Page 198 Using the Menus Canadian custom rating options If you selected Canada as the country of residence on page 60, the Custom Rating Menu includes the following options. (If you selected U.S.A., see page 66.) Option Description English Rating All children. Children 8 years and older.

  • Page 199: Other Information

    Beta, ED Beta VCRs 8 mm VCR VHS VCR DVD Player If you have video equipment other than Sony brand that you want to control with the projection TV’s remote control, use the following procedures to program the remote control. ✍...
  • Page 200 If you enter a new code number, the code number you previously entered at that setting is erased. ❑ In some rare cases, you may not be able to operate your component with the Sony remote control. In this case, use the component’s own remote control unit.
  • Page 201 Minolta 305, 304 Wards 327, 328, 335, VCRs 331, 332 Mitsubishi/ 323, 324, 325, Manufacturer Code Yamaha 314, 330, 336, Sony Multitech 325, 338, 321 Admiral Zenith 314, 336, 337 (M. Ward) Olympic 309, 308 DVD Players Aiwa 338, 344...

  • Page 202: Operating Other Components With Your Projection Tv Remote Control

    Other Information Operating Other Components with Your Projection TV Remote Control Operating a VCR Open the panel and move the slide switch to the AV input you coded for this device. To Do This ... Press green POWER button (inside the panel) Turn on/off Change channels CH +/–...

  • Page 203: Operating A Cable Box

    Other Information Operating a Cable To Do This ... Press SAT/CABLE (POWER) Turn on/off Select Cable Box SAT/CABLE (FUNCTION) Select a channel 0-9 buttons, ENTER CH +/– Change channels Back to previous channel JUMP Operating a Satellite To Do This ... Press Receiver Turn on/off...

  • Page 204: Troubleshooting

    Troubleshooting If, after reading these operating instructions, you have additional questions related to the use of your Sony television, please call our Customer Information Services Center at 1-800-222-SONY (7669) (U.S. residents only) or (416) 499-SONY (7669) (Canadian residents only). Problem Possible Remedies ❏...
  • Page 205 Other Information Problem Possible Remedies ❏ Projection TV is fixed to one Use Auto Program in the Channel menu to add receivable channels that are not channel presently in TV memory (see page 54). ❏ Check your Channel Fix settings (see page 54). ❏...
  • Page 206 Other Information Problem Possible Remedies ❏ You get the same program in the Both may be set to the same channel. Try changing channels in either the main window picture as in the main picture or the window picture. ❏ picture You may be running all your channels through a cable box.

  • Page 207: Specifications

    Speaker Output 20 W × 2 Dimensions (W × H × D) × 51 × 24 inches (1,194 × 1,310 × 630 mm) (KP-51HW40) × 54 × 27 inches (1,326 × 1,377 × 690 mm) (KP-57HW40) Mass 167 lb 9oz (76 kg) (KP-51HW40)
  • Page 208 Other Information Supplied Accessories Remote Control RM-Y909 AA (R6) Batteries 2 supplied for remote control Optional Accessories AV Cable VMC-810/820/830 HG Audio Cable RKC-515HG Control S Cable RK-G69HG Component Video Cable VMC-10/30 HG AV Receiver STR-V555ES or equivalent Design and specifications are subject to change without notice.
  • Page 209 Index Connecting Audio receiver 25 Activating a Twin View screen AV receiver 30 Adding channels to the channel list –?? Cable box 17 Adjusting audio, Steady Sound Cable or antenna 16 ANT button Camcorder 29 Antenna, connecting Digital TV Receiver 28 Audio menu DVD player 26 Audio receiver, connecting...
  • Page 210 manual 53 setting up 53 Parental control, described using 40 Password, changing PIC MODE button FAVORITES button Picture contrast, adjusting Features Picture size, adjusting in Twin View Flash Focus POWER button described 9 POWER buttons (GREEN) performing 33 Presetting channels 32, 54 FREEZE button Problems, troubleshooting...
  • Page 211 Surround sound SYSTEM OFF button Tape-to-tape editing Time set current 57 set daylight saving 57 Timer menu Timer setting Treble, adjusting Troubleshooting 73–75 TV function button 34, 35 TV power button TV/VIDEO button Twin View™ activating a picture 41 described 8 using 41 connecting two, for tape editing 22 using with TV remote control 71...
  • Page 215 If, after reading this instruction manual, you have additional questions related to the use of your Sony projection TV, please call one of the following numbers (English only). Customers in the continental United States contact the Direct Response Center at:...
  • Page 216 HISTORY INFORMATION FOR THE FOLLOWING MANUAL: RA-6 SERVICE MANUAL CHASSIS MODEL NAME REMOTE COMMANDER DESTINATION CHASSIS NO. KP-51HW40 RM-Y909 SCC-P65G-A KP-51HW40 RM-Y909 Canadian SCC-P65G-A KP-57HW40 RM-Y909 SCC-P65F-A KP-57HW40 RM-Y909 Canadian SCC-P65F-A ORIGINAL MANUAL ISSUE DATE: 8/2001 ALL REVISIONS AND UPDATES TO THE ORIGINAL MANUAL PRIOR TO 9/2004 ARE APPENDED TO THE END OF THE PDF FILE.
  • Page 217 REF. NO. PART NO. DESCRIPTION REF. NO. PART NO. DESCRIPTION *A-1272-481-A A BOARD, COMPLETE *A-1299-596-A A BOARD, COMPLETE COLOR REAR VIDEO PROJECTOR Sony Corporation English Sony Technology Center 2001KJ74WEB-1 Technical Services Printed in USA Service Promotion Department 9-965-434-91 © 2001.11...
  • Page 218 Section 8: Electrical Parts List CR Board (Page 98) CG, CB Boards (Pages 99-100) D Board (Page 123,128) COLOR REAR VIDEO PROJECTOR Sony Corporation English Sony Technology Center 2002AJ74WEB-1 Technical Services Printed in USA Service Promotion Department 9-965-434-81 © 2002.1...
  • Page 219 KP-51HW40/57HW40 (AFFECTS S/N’s 90000001- 90XXXXXX ONLY) SECTION 3 SET-UP ADJUSTMENTS the mode Cover the both green and red picture lenses with the 3-1. SCREEN VOLTAGE ADJUSTMENT lens caps is aligned the same as was done for green. (COARSE ADJUSTMENT) 1. Receive the Monoscope signal.
  • Page 220 KP-51HW40/57HW40 (AFFECTS S/N’s 90000001- 90XXXXXX ONLY) 3-5. FOCUS VR ADJUSTMENT 1. Set generator to crosshatch. 9. Check 2-Pole magnet adjustment. If necessary, repeat steps 1 – 6. 2. Cover the both red and blue picture lenses with the lens caps 10.
  • Page 221 KP-51HW40/57HW40 (AFFECTS S/N’S 90000001- 90XXXXXX ONLY) CR/CG/CB BOARD SCHEMATIC — 62 —...
  • Page 222 KP-51HW40/57HW40 (AFFECTS S/N’s 90000001- 90XXXXXX ONLY) SECTION 7: EXPLODED VIEWS Components not identifi ed by a part number or The component parts of an assembly are indicated by Items marked with an asterisk are not stocked since description are not stocked because they are seldom the reference numbers in the far right column of the parts they are seldom required for routine service.
  • Page 223 KP-51HW40/57HW40 (AFFECTS /SN’s 90000001-90XXXXXX ONLY) SECTION 7: EXPLODED VIEWS Components not identifi ed by a part number or The component parts of an assembly are indicated by Items marked with an asterisk are not stocked since description are not stocked because they are seldom the reference numbers in the far right column of the parts they are seldom required for routine service.
  • Page 224 KP-51HW40/57HW40 (AFFECTS S/N’s 90000001- 90XXXXXX ONLY) SECTION 8: ELECTRICAL PARTS LIST NOTE: The components identifi ed by shading RESISTORS The components in this manual identifi ed by the following mark are critical for safety. Replace only symbol: indicate parts that have been carefully factory- •...
  • Page 225 KP-51HW40/57HW40 (AFFECTS S/N’s 90000001- 90XXXXXX ONLY) NOTE: Les composants identifi es per un trame et une NOTE: The components identifi ed by shading CR CG marque sont critiques pour la securite. Ne les mark are critical for safety. Replace only remplacer que par une piece portant le numero specifi...
  • Page 226 KP-51HW40/57HW40 (AFFECTS S/N’s 90000001- 90XXXXXX ONLY) NOTE: Les composants identifi es per un trame et une NOTE: The components identifi ed by shading marque sont critiques pour la securite. Ne les mark are critical for safety. Replace only remplacer que par une piece portant le numero specifi e.
  • Page 227 KP-51HW40/57HW40 (AFFECTS S/N’s 90000001- 90XXXXXX ONLY) REF. NO. PART NO. DESCRIPTION VALUES REF. NO. PART NO. DESCRIPTION VALUES NETWORK RESISTOR R857 1-216-838-11 RES-CHIP 1/16W R858 1-216-829-11 RES-CHIP 4.7K 1/16W 1-233-576-11 RES, CHIP NETWORK 100 R859 1-218-708-11 METAL CHIP 4.7K 0.5% 1/16W...
  • Page 228 KP-51HW40/57HW40 (AFFECTS S/N’s 90000001- 90XXXXXX ONLY) A component identifi ed by this symbol indicates that it NOTE: The components identifi ed by shading has been carefully factory-selected to satisfy regulations mark are critical for safety. Replace only regarding X-ray radiation. Should replacement be required, with part number specifi...
  • Page 229 REF. NO. PART NO. DESCRIPTION REF. NO. PART NO. DESCRIPTION A-1373-851-A U BOARD, COMPLETE A-1373-870-A U BOARD, COMPLETE COLOR REAR VIDEO PROJECTOR Sony Corporation English Sony Technology Center 2002EJ74WEB-1 Technical Services Printed in USA Service Promotion Department © 2002.5 9-965-434-92...
  • Page 230 Self Diagnosis Supported model RA-6 SERVICE MANUAL CHASSIS MODEL NAME REMOTE COMMANDER DESTINATION CHASSIS NO. KP-51HW40 RM-Y909 SCC-P65G-A KP-51HW40 RM-Y909 Canadian SCC-P65G-A KP-57HW40 RM-Y909 SCC-P65F-A KP-57HW40 RM-Y909 Canadian SCC-P65F-A CORRECTION - 3 SUBJECT: EXPLODED VIEW PARTS LIST CORRECTION Correct the service manual as shown.
  • Page 231 KP-51HW40/57HW40 RM-Y909 RM-Y909 SECTION 7 EXPLODED VIEWS NOTE: REF. NO. PART NO. DESCRIPTION REMARK _____________ REF. NO. PART NO. DESCRIPTION REMARK ________ _________ _____________ ________ _________ _____________ _________ • Items with no part number and no • Items marked "...
  • Page 232 KP-51HW40/57HW40 Sony Corporation English Sony Technology Center 2001HJ74WEB-1 Technical Services Printed in USA Service Promotion Department 9-965-434-93 © 2002.8...
  • Page 233 INCORRECT CORRECT REF. NO. PART NO. DESCRIPTION REF. NO. PART NO. DESCRIPTION D8002 8-719-110-17 RD20ES-B2 D8002 8-719-110-53 RD20ES-B2 COLOR REAR VIDEO PROJECTOR Sony Corporation English Sony Technology Center 2002LJ74WEB-1 Technical Services Printed in USA Service Promotion Department 9-965-434-94 © 2002.12...
  • Page 234 Needs to be Added ----------------------------> D5027 8-719-069-54 UDZSTE-175.1B Needs to be Added ----------------------------> R5048 1-216-833-11 METAL CHIP 10K 5% 1/10W COLOR REAR VIDEO PROJECTOR Sony Corporation English Sony Technology Center 2003GJ74WEB-1 Technical Services Printed in USA Service Promotion Department 9-965-434-95 © 2003.7...
  • Page 235 8-733-652-05 CRT 07MVC21(G) - L 8-733-647-05 CRT 07MVC41(B) - L (VM) (57HW40) 8-733-649-05 CRT 07MVC31(B) - L (51HW40) COLOR REAR VIDEO PROJECTOR Sony Corporation English Sony Technology Center 2003KJ74WEB-1 Technical Services Printed in USA Service Promotion Department 9-965-434-82 © 2003.11...
  • Page 236 KP-51HW40/57HW40 RM-Y909 RM-Y909 7-3. PICTURE TUBE : +BVTP 3X12 7-685-648-79 : +BVTP 4X12 7-685-661-14 NOTE: For S/N's 97000001-98XXXXXX, use CRT P/N's listed below. For S/N's 90000001-90XXXXXX, use CRT P/N's referred to in Supplement-1 REF. NO. PART NO. DESCRIPTION REMARK REF. NO. PART NO.
  • Page 237 KP-51HW40/57HW40 (AFFECTS /SN’s 90000001-90XXXXXX ONLY) SECTION 7: EXPLODED VIEWS Components not identifi ed by a part number or The component parts of an assembly are indicated by Items marked with an asterisk are not stocked since description are not stocked because they are seldom the reference numbers in the far right column of the parts they are seldom required for routine service.

This manual is also suitable for:

Kp-57hw40

Table of Contents