Download  Print this page

Advertisement

3-11-3. Operation Method for Projector Engine
Mode
MUTING
Category up
Adjustment item
up
Adjustment item
down
Category down
Initialize data
(Not stored)
MENU
data up/down
VOLUME +
RM-Y909
1. Functions of Keys on Commander
• 1
: Changes adjustment item. (item No. moves up)
: Marker moves clockwise from center to out-
side. (in fine adjustment mode)
• 4
: Changes adjustment item.
(item No. moves down)
: Marker moves counterclockwise from outside
to center. (in fine adjustment mode)
• 2
: Changes adjustment category.
(category No. moves up)
• 5
: Changes adjustment category.
(category No. moves down)
• Joystick : Changes data value. (up or down)
: Marker moves up, down, or to the left or right.
(in fine adjustment mode)
• 3
: Changes adjustment color.
GRN c BLU c RED
• 6
: Displays or changes internal test signals.
: crosshatch + external signal c crosshatch +bor-
derline c crosshatch only c dot only c off
• 9
: Switches adjustment mode.
Coarse adjustment mode c fine adjustment
mode
• Press joy : Switches marker moving method.
stick
TV POWER
Commander Function
Buttons
DISPLAY
- + ENTER
MUTING+ENTER
7 + ENTER
Color change
2. Operation Method for Coarse Adjustment
Internal test signal
1) Enter the Service mode, and select "PJE".
Mode select
2) Press "1" or "4" button on the commander to select the
(Fine or Coarse)
item, and use the joystick to change the data.
ENTER
PJE
FDIS
3) Select "GRN CENT" . When BLU or RED is displayed,
press "3" button on the commander to change the adjust-
ment color in the order of GRN c BLU c RED.
4) In the GRN, BLU, or RED mode,move v, Vdirection the
joystick can change the data in vertical direction, or b, B
direction in horizontal direction.
Color
GRN
CENT
5) Before returning to the Service mode, press "MUTING"
+"ENTER" buttons on the commander to write the data.
(Omission of this operation causes the set data to be returned
to the data before adjustment)
– 26 –
(in fine adjustment mode)
joystick (v, V, b, B) keys c 1 and 4 buttons
Mode
Description
READ
Writes data to NVM.
WRITE
Reads data from NVM.
PJE
Service data initialization. Not stored.
INITIAL
(Be sure not to use usually)
Item No.
00
00
Adjustment Item
Data (H)
000
000
Adjustment Item
KP-51HW40/57HW40
RM-Y909
RM-Y909
Data
Joystick
v, B direction:Data up
V, b direction:Data down
Data (V)
b : Data (H) up
B : Data (H) down
v : Data (V) up
V : Data (V) down

Advertisement

Table of Contents

   Related Manuals for Sony KP-51HW40

This manual is also suitable for:

Kp-57hw40

Comments to this Manuals

Symbols: 0
Latest comments:
  • #1202186 Sep 19, 2018 12:39:
    I CAN'T GET AN ANSWER TO A SIMPLE QUESTION FROM THE SERVICE MANUAL: INSTRUCTIO​NS ON HOW TO REPLACE THE LAMP ON MT REAR PROJECTION SONY TV KP51HW40