Basic Operation Of Hands-Free Phoning (Model-D); Before Use; Making A Call - Kenwood KCA-BT200 Instruction Manual

Basic Operation of hands-free phoning (Model-D)

Before Use

• You need to register your cell-phone before using
it with this unit. For more details, see <Registering
Bluetooth device> (page 12).
• If you have registered two or more cell-phones,
you need to select one of them. For more details,
see <Selecting the Bluetooth device You Wish to
Connect> (page 14).
• To use the Phone Book, it must be downloaded to
this unit in advance. For details, see <Downloading
the Phone Book> (page 13).
• For the method of operation in the Menu mode,
refer to the Instruction Manual for Control Unit.
• For more information regarding the function with
[ ] mark, see <Function note> (page 23).

Making a call

Dialing Method
1. Entry dialing method mode
Model-D-1, 2, 3:
Press the [ATT] button for at least 1 second.
Model-D-4:
Select "D.MODE" in Menu mode.
2. Select a dialing method
Model-D-1, 4:
Press the Control knob ([38] button).
"N-DIAL" » "PH-BOOK1" » "PH-BOOK2" » "OUT-CALL"
» "IN-CALL"
Model-D-2:
Press the Control knob ([38]).
"DIAL" » "INITIAL" » "PHONE BOOK"/ "PH.BOOK" »
"OUT-CALL" » "IN-CALL"
Model-D-3:
2-1-1. Press the [NEXT] button.
2-1-2. Press the [1] ("DIAL"), [2] ("PHBK"), [3] ("OUT-
C"), or [4] ("IN-C") button.
Pressing the [2] ("PHBK") button switches
between the Phone Book search methods.
3
Methods of operations in the above modes are
described below.
3. Exit the dialing method selection mode
Model-D-1, 2, 3:
Press the [ATT] button for at least 1 second.
Model-D-4:
Exit Menu mode.
3
Dial a number ( )
2-1. Select the "N-DIAL"/ "DIAL" display.
2-2. Enter a phone number
Press the number ([1] – [0]), #([FM]), *([AM]), or
+([¢]) button on the remote controller.
10
|
KCA-BT200
2-3. Make a call
Press the [DIRECT] button on the remote controller.
☞ You can input max 32 digits.
3
Speed dialing (Preset dial)
2-1. Select the "N-DIAL"/ "DIAL" display.
2-2. Select the preset dial number
Model-D-1, 4:
Press the [1] – [6] button.
Model-D-2:
2-2-1. Press the [FNC] button.
2-2-2. Select the number to recall by turning the
Control knob.
2-2-3. Press the Control knob.
Model-D-3:
2-2-1. Press the [NEXT] button.
2-2-2. Press the [1] ("1") – [6] ("6") button.
2-3. Make a call
Press the Control knob ([38] button) for at least 1
second.
☞ You need to register the preset dial number. (page 11)
3
Calling a number in the call log (
2-1. Select the "OUT-CALL"/"OUT-C" (outgoing call) or
"IN-CALL"/"IN-C" (incoming call) display.
2-2. Select a name or phone number
Push the Control knob towards up or down.
2-3. Make a call
Press the Control knob ([38] button) for at least 1
second.
3
Calling a number in the Phone Book (
2-1. Select the "PH-BOOK1"/ "INITIAL" display, proceed
to step 2-2.
Select the "PH-BOOK2"/ "PHONE BOOK"/ "PH.
BOOK" display, proceed to step 2-3.
2-2. Select the initial to be searched for
Operation type Operation
2-3. Select the name
Operation type Operation
2-4. Make a call
Press the Control knob ([38] button) for at least 1
second.
)
)
38