Connection; Installation - Kenwood KCA-BT200 Instruction Manual
Kenwood bluetooth unit instruction manual
Hide thumbs
Also See for KCA-BT200:
- Instruction manual (53 pages) ,
- Product information (52 pages) ,
- Training manual (52 pages)
Table of Contents
Advertisement
Available languages
Available languages
Connection
Control Unit
(KAB connector)
Control Unit
(5L connector)
Accessory 4
(1.5 m, 5ft)
Type Switch (page 24)
1 2 3
Connector for external device
⁄
• Only the terminal which has
the same shape as that of the
connector connected to the
Accessory 1
control unit can be used.
(3 m, 9.5 ft)
• Only one external device can be
connected.
If You Want to Connect KCA-S220A
Connect the Hands-Free Box to the terminal labelled
TO CHANGER 2.
KCA-BT200
Control Unit (5L)
KCA-S220A
TO HEAD UNIT
TO CHANGER 1
TO CHANGER 2
Disc Changer
¤
• Please keep the total extension of the control cable from
the control unit to the disc changer to 13 m (43 ft) or
less. Control cable lengths in excess of 13 m will cease to
function properly.
Installation
Installation the Microphone Unit
1
Check the installation position of the microphone
(accessory 1).
2
Remove oil and other dirt from the installation
surface.
3
Install the microphone.
4
Wire the microphone cable up to the hands-free
box with it secured at several positions using tape
or the like.
Fix a cable with a commercial
item of tape.
Peel the release coated paper of double-face adhesive tape to
fix on the place shown above.
Adjust the direction of the microphone to the driver.
⁄
• Install the microphone as far as possible from the cell-
phone.
Page 25
|
English
Hide quick links:
Advertisement
Chapters
Table of Contents
