Cautions In Operation - JUKI LK-1900B series Instruction Manual

6-8. Cautions in operation

(1) When the error indicator lamp lights up, be sure to check the cause of trouble and take a proper correc-
tive measure.
(2) Do not draw, by hand, the material being sewn during sewing. Doing so will cause the needle shift from
the correct position. If the needle moves from the correct position, press READY key
This will return the needle to the normal origin.
(3) Do not turn OFF the power in a state that the needle is lowered. The presser comes down and the wiper
interferes with needle. As a result, there is a danger of needle breakage or the like.
Reference for the sewing speed to be applied
Sewn product / thread / needle
8-layered denim / Cotton thread #50 / DPx5 #16
8-layered woolen gabardine / Polyester filament #50 / DPx5 #14
8-layered denim / Cotton thread #20 / DPx17 #19
Overlapped sewing of 6 x 12-layered denim / Cotton thread #20 / DPx17 #19 H (Heavy-weight material) / 2,500 sti/min
Tricot + shoulder strap (3 + 1) layered section / Polyester spun #60 / DPx5 #11
* To prevent the thread breakage due to the needle heat, set the sewing speed referring to the above ta-
ble in accordance with the sewing conditions.
* For sewing the foundation or the like, lower the height of the needle bar to prevent the stitch skipping.
(Refer to the item "I.7-1. Adjusting the height of the needle bar"
S (Standard) / 3,200 sti/min
S (Standard) / 2,300 sti/min
H (Heavy-weight material)/3,200 sti/min,
W (Double-capacity hook)/2,700 sti/min
F (Foundation) / 2,000 sti/min
p.44).
－ －
42
two times.
Head type / Sewing speed