Hdmi Tm Cec Control Input Source Selection; Adjustingthe Amplifier's Audio - Toshiba 58L9300U User Manual

Basicfeatures 97
Using HDMF _CEC Control
NOTE These functionsdepend on theconnected devices.
TheHDMI ' _CECDeviceControlitem is notavailable underthefollowing
conditions:
•:. A non-HDMl"input isselected
¢ TheEnableHDIVllCECControlitem is setto Off
o:. Theconnected HDMI
T M
CECdeviceis nota playback, r ecordingor
tunerdevice
HDIVll
TM
CECControl input source selection
If an HDMI
TM
CEC device with HDMI T_" switching capability (e.g. an
amplifier) is connected to the HDMI T_" input, you can select another
HDMI
TM
CEC device that is connected to the master HDMI
TM
device.
Use the INPUT button on the remote control or the control panel, see
"Learning about the remote control" on page 53.
Adjustingthe amplifier's audio
Using the TV's remote control, you can adjust or mute the sound volume
of your audio system.
o:. The VOL (+ -) buttons adjust the volume level.
o:. The MUTE button turns off the sound.
1 Press the SETUP button.
2 Select Options > HDMI CEC Control Setup and press the OK
button.
3 Press the A/V (arrow) buttons to select Initial Speaker Setting
and press the OK button.
4 Press the A/V (arrow) buttons to select Amplifier.
NOTE Confirmthat a connected HDMI
T M
CECdevice (suchas DVDplayer, e tc.)is
selected fortheAmplifierinputsource.
NOTE -:. Youcanalsousethis functionwhentheaudiosystemis connected to
theTV'sDIGITAL A UDIOOUT terminal(not HDMI ' _connection).
Selecta digitalaudioinputmodeon theamplifier.
•_. These functionsdepend on thedevice connected.