Hdmi ™ Cec Control Input Source Selection; Adjusting The Amplifier's Audio - Toshiba 58L9300U User Manual

NOTE
™
HDMI CEC Control input source selection
If an HDMI
amplifier) is connected to the HDMI
™
HDMI
Use the INPUT button on the remote control or the control panel, see
"Learning about the remote control" on page

Adjusting the amplifier's audio

Using the TV's remote control, you can adjust or mute the sound volume
of your audio system.
The VOL (+ -) buttons adjust the volume level.
❖
The MUTE button turns off the sound.
❖
1 Press the SETUP button.
2 Select Options > HDMI CEC Control Setup and press the OK
button.
3 Press the p / q (arrow) buttons to select Initial Speaker Setting
and press the OK button.
4 Press the p / q (arrow) buttons to select Amplifier.
NOTE
NOTE
These functions depend on the connected devices.
™
The HDMI CEC Device Control item is not available under the following
conditions:
™
A non-HDMI
❖
The Enable HDMI CEC Control item is set to Off
❖
The connected HDMI
❖
tuner device
™
CEC device with HDMI
CEC device that is connected to the master HDMI
Confirm that a connected HDMI
selected for the Amplifier input source.
You can also use this function when the audio system is connected to
❖
the TV's DIGITAL AUDIO OUT terminal (not HDMI
Select a digital audio input mode on the amplifier.
These functions depend on the device connected.
❖
Using HDMI
input is selected
™
CEC device is not a playback, recording or
™
switching capability (e.g. an
™
input, you can select another
™
CEC device (such as DVD player, etc.) is
Basic features
™
CEC Control
™
53.
™
connection).
97
device.