Settingnosignalpowerdown - Toshiba 58L9300U User Manual

1 02 Basicfeatures
.... Setting No Signal Power Down
NOTE If a powerfailureoccurs,thesleeptimersettingmaybecleared.
To display the time remaining until the TV turns off, press the SLEEP
button.
To cancel the sleep timer, press the SLEEP button repeatedly or press the
&/V (arrow) buttons until it is set to 0 minutes.
NOTN Whenthefollowingfeatures areset,thefeature that is setfor thenearest
timewill function.
4 SleepTimer
4 Autoshutdown after1 hourof inactivity(afterpoweringon byOn
Timer)
4 Nosignalautopoweroff (after approximately 1 5 minutesof no signal)
SettingNoSignalPowerDown
When an input's setting in this feature is set to On, The TV will
automatically turn itself off after about 15 minutes if no signal is detected.
You can change each input's setting to Off: ANT/CABLE, Video 1, Video
2, ColorStream HD, HDMI 1, HDMI 2, HDMI 3, HDMI 4, or PC.
1 Press the SETUP button.
2 Select Options > Power Management > No Signal Power Down,
and then press the OK button.
3 Press the &/V (arrow) buttons to select the item you want to
change and press the OK button.
4 Press the A/V (arrow) buttons to select On or Off.
5 Press the EXIT button.
NOTN 4 Default s ettingfor eachinputis On.
4 A warningmessage will appear 1 minutebeforeturningoff.